I was able to get my print drivers to upload after doing the following. 1) Checked that the settings for the printer driver upload directory were set to allow my account to write to it. /# ls -l /s01/samba drwxrwsr-x 3 vlkidder samba 512 Jan 06 21:45 drivers
2) Removed the printer admin option from smb.conf file. These are my current smb.conf settings related to printing. ; Global Settings for Printers printing = aix load printers = yes printcap name = /etc/printcap print command = /usr/bin/lpr -P%p -h -r %s lpq command = enq -e -As -P'%p' use client driver = no [printers] comment = samba printers path = /var/spool/samba printable = yes browseable = no guest ok = no public = no read only = yes writeable = no [print$] comment = samba printer driver upload path = /s01/samba/drivers write list = vlkidder browseable = yes guest ok = no read only = yes 3) Ran "net rpc rights grant vlkidder SePrintOperatorPrivilege" to grant my account "vlkidder" printer admin rights. I'm not sure why, but when I run a net rpc command I get this the error message "Could not connect to server 127.0.0.1 The username or password was not correct. Connection failed: NT_STATUS_LOGON_FAILURE". There is a password for root account in the smbpasswd file. If I reset the samba password for root using "smbpasswd root", I can run the net rpc commands with no problem. That's it. Now driver upload works fine. The error I originally posted "_spoolss_addprinterdriver: Failed to send message about upgrading driver[]!" still shows up in my log file. The driver uploads and I'm able to modify the printer properties, connect the printer to a client computer, and print, so I'm not going to worry about it. Richard Chapman <[EMAIL PROTECTED]> wrote on 01/05/2008 06:42:11 PM: > Hi Vickie > > I have been following your thread in the samba list - and I think I am > wrestling with a similar problem. I want to upload windows printer > drivers to a workgroup samba server. My samba is also 3.0.25. on a > Centos 5.1 server. > > I have put the "enable privilege = yes" into smb.conf - and restarted samba. > However - unlike you - when I try the command: > > #net rpc rights grant 'rhc' SePrintOperatorPrivilege > And give the root password, I get the error: > Failed to grant privileges for rhc (NT_STATUS_ACCESS_DENIED) > > "rhc" is a user on both the linux server and a windows client > machine - though I must admit I am confused about how the two user5 > groups relate to each other in a workgroup samba setup. > > Curiously - if I attempt to grant the right to a non-existent user - > I do not get an error. > > Since you seem to be trying to achieve the same thing - you may have > encountered similar problems. Can you throw any light on this problem? > > Thanks > > Richard. > > > > > > Vickie L. Kidder wrote: > > Thanks to those who responded to my original question. > > > > I ran this command and it accepted it after I provided the root password. > > # net rpc rights grant 'vlkidder' SePrintOperatorPrivilege > > > > Checked to see if 'vlkidder' had printer admin privilege and it seems ok. > > # net rpc rights list accounts > > Password: > > BUILTIN\Print Operators > > No privileges assigned > > > > SMBTEST\vlkidder > > SePrintOperatorPrivilege > > > > BUILTIN\Account Operators > > No privileges assigned > > > > BUILTIN\Backup Operators > > No privileges assigned > > > > BUILTIN\Server Operators > > No privileges assigned > > > > BUILTIN\Administrators > > SeMachineAccountPrivilege > > SeTakeOwnershipPrivilege > > SeBackupPrivilege > > SeRestorePrivilege > > SeRemoteShutdownPrivilege > > SePrintOperatorPrivilege > > SeAddUsersPrivilege > > SeDiskOperatorPrivilege > > > > Everyone > > No privileges assigned > > > > After using the Printer Wizard from Windows to upload the driver, it goes > > through the process of copying the driver files to the [print$] directory, > > but there is still an error in my log file. > > > > _spoolss_addprinterdriver: Failed to send message about upgrading driver > > []! > > [2007/12/27 15:59:26, 1] smbd/service.c:close_cnum(1230) > > vlkidder-06212 (10.1.3.8) closed connection to service print$ > > > > > > > > > >> I'm trying to upload print drivers to a stand-alone samba server running > >> > > > > > >> version 3.0.25. > >> The server is part of a workgroup (not domain). > >> > >> My log files show messages that it cannot update the driver. > >> Before I had the printer admin option set in my smb.conf file to allow a > >> > > > > > >> non-root user to do the printer admin and everything worked fine. > >> > >> I have read the Samba How To Notes section on important changes since > >> > > 3.x, > > > >> it says the following. > >> "Group mappings are essential only if the Samba server is running as a > >> PDC/BDC. Stand-alone servers do not require these group mappings.". > >> > >> Can anyone help me to understand what I need to do to allow a non-root > >> user to perform printer admin functions on a stand-alone server? > >> > >> -- > >> To unsubscribe from this list go to the following URL and read the > >> instructions: https://lists.samba.org/mailman/listinfo/samba > >> > -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
