I changed the share name. I was able to access the share finally. I am now getting those errors after a sytem reboot: [2008/07/22 12:21:49, 0] lib/util_sock.c:get_peer_addr(1224) getpeername failed. Error was Transport endpoint is not connected [2008/07/22 12:22:13, 0] lib/util_sock.c:write_data(562) write_data: write failure in writing to client 10.130.101.85. Error Connection reset by peer [2008/07/22 12:22:13, 0] lib/util_sock.c:send_smb(761) Error writing 4 bytes to client. -1. (Connection reset by peer)
On the XP side i get the network path was not found. XP is online they can ping with the samba server. The samba server has the firewall disabled and Selinux disabled too. I have read on some other ports that it could be a port issue. Any ideas? Thank you 2008/7/22 Rubin Bennett <[EMAIL PROTECTED]>: > I've actually seen this a number of times. > > Change your share name in smb.conf from [Share] to [share] and I'll bet > it works fine. > > I haven't picked it apart as to why this happens, but it seems like > there's something about the case sensitivity/ insensitivity between *nix > and *doze that disagree when the share is defined with mixed case. > > Has anyone else seen this besides me? It seems fairly consistent > between versions and flavors of Linux and Samba in my experience. > > HTH, > Rubin > > On Mon, 2008-07-21 at 22:30 -0500, Adam Williams wrote: > > are you trying to connect to \\server\acn or \\server\share? > > > > Thomas Vito wrote: > > > Hello, > > > > > > On a RHEL 5 U2 server i am trying again to setup samba this time in > user > > > mode, see smb.conf below: > > > > > > [global] > > > workgroup = ACME > > > realm = EU.ACME.COM > > > server string = %h > > > password server = amsterdam-dc01.eu.acme.com > > > passdb backend = tdbsam > > > local master = No > > > dns proxy = No > > > wins server = 10.130.12.120 > > > ldap ssl = no > > > idmap uid = 16777216-33554431 > > > idmap gid = 16777216-33554431 > > > cups options = raw > > > > > > [printers] > > > comment = All Printers > > > path = /var/spool/samba > > > printable = Yes > > > browseable = No > > > > > > [Share] > > > path = /home/acn > > > write list = acn, tci > > > read only = No > > > guest ok = Yes > > > > > > I have created two users acn and tci then used smbpasswd to create > their > > > password. > > > I have created the share folder on the samba folder /home/acn and even > tried > > > a chmod 777 on it. > > > Each time i try to connect to the share i get either an error from > windows > > > client : No network provider accepted the given network path. Sometimes > i > > > get a login prompt, enter my cred tci and password, then after a few > minutes > > > i get The specified network name is no longer available > > > > > > Here is the smbd.log: > > > > > > [2008/07/21 17:17:31, 0] lib/util_sock.c:get_peer_addr(1224) > > > getpeername failed. Error was Transport endpoint is not connected > > > [2008/07/21 17:17:31, 0] lib/util_sock.c:get_peer_addr(1224) > > > getpeername failed. Error was Transport endpoint is not connected > > > [2008/07/21 17:17:31, 0] lib/util_sock.c:read_data(534) > > > read_data: read failure for 4 bytes to client 0.0.0.0. Error = > Connection > > > reset by peer > > > > > > [EMAIL PROTECTED] ~]# smbd -V > > > Version 3.0.28-1.el5_2.1 > > > > > > -- > Rubin Bennett > RB Technologies > http://thatitguy.com > [EMAIL PROTECTED] > (802)223-4448 > > "They that can give up essential liberty to obtain a little > temporary security deserve neither liberty nor safety" > --Benjamin Franklin, Historical Review of Pennsylvania, 1759 > > > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/listinfo/samba > -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
