simo wrote:
I guess a look at the idmap_rid manpage would help then.
Ironically I read the entire samba documentation (skipping only the
printing sections) and all the man pages too, but perhaps in overdid it
and missed something...
The thing which surprised me is that everything worked, if testparm had
raised any error or warning, if a service failed to accept the config, I
would have googled and re-read the docs
What really threw me was that this worked fine in 3.0.24 and not in
3.0.28a onwards.
To have it working as expected on 3.0.25+ you should add the following
parameter:
idmap domains = PRIMARYDOMAIN OTHERDOMAIN
idmap config PRIMARYDOMAIN:backend = rid
idmap config PRIMARYDOMAIN:default = yes
idmap config OTHERDOMAIN:backend = rid
and remove the:
idmap backend = rid
and optionally (to avoid a 1000 ids hole at the start of each range):
idmap config PRIMARYDOMAIN:base_rid = 1000
idmap config OTHERDOMAIN:base_rid = 1000
see the idmap_rid(8) manpage.
I've done all this and it seems to have fixed it on the newer samba
boxes I have.
Also note that your configuration will probably be ok when we release
samba 3.3.0, as we modified slightly the code to avoid the 'idmap
domains' parameters and to make back 'idmap backend' the main backend
used. But until then your current configuration is not correct for
3.0.25+ and the 'idmap config' directives are ignored w/o the idmap
domains one
Thanks
-h
--
Hari Sekhon
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
