Hi list,
I use Samba 3.0.24 on Etch.
I want to connect to my Samba share trough routed vpn.
Samba server works well from the lan, and my openvpn works fine.
But something is strange ...
In my smb.conf :
hosts allow = 127.0.0.1 192.168.10.0/24 10.8.0.0/24
hosts deny = 0.0.0.0/0
bind interfaces only = yes
interfaces = 127.0.0.1 192.168.10.254 10.8.0.1
where 192.168.10.254 is my lan interface and 10.8.0.1 is tun0.
With this, on my server :
me:~$ smbclient -L //10.8.0.1
Error connecting to 10.8.0.1 (Connexion refusée)
Connection to 10.8.0.1 failed
But if I use : *bind interfaces only = no*, then connexion works....
me:~# ifconfig
[...]
eth1 Lien encap:Ethernet HWaddr 00:E0:4C:EA:06:02
inet adr:192.168.10.254 Bcast:192.168.10.255
Masque:255.255.255.0
adr inet6: fe80::2e0:4cff:feea:602/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:326149 errors:0 dropped:0 overruns:0 frame:0
TX packets:378521 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:76237419 (72.7 MiB) TX bytes:264527493 (252.2 MiB)
Interruption:11 Adresse de base:0xe400
lo Lien encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:84624 errors:0 dropped:0 overruns:0 frame:0
TX packets:84624 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:33556895 (32.0 MiB) TX bytes:33556895 (32.0 MiB)
tun0 Lien encap:UNSPEC HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet adr:10.8.0.1 P-t-P:10.8.0.2 Masque:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:76 errors:0 dropped:0 overruns:0 frame:0
TX packets:74 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:100
RX bytes:10715 (10.4 KiB) TX bytes:10307 (10.0 KiB)
So, why the connexion to 10.8.0.1 is refused in "normal" configuration ?
My only solution for the moment is to push a route for 192.168.10.0/24 and
use \\192.168.10.254 on my windows client, by I'd want to use \\10.8.0.1...
Any ideas ?
Thanks in advance,
Manu
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
