Marcelo Opazo Vivallos:
Hi!
I have 8 subnets:
192.168.100.x/24
192.168.150.y/24
192.168.200.z/16
etc ...
Install a Primary Domain Controller (PDC), so that
users to perform authentication on the domain with its mounting
remote disks, among others. The network is correctly configured,
that is, the teams are perfectly by "ping" and the open
ports between the networks see no problems.
Notes:
- I disabled the multicast UDP in the route
- Add the lines in the smb.conf:
- Hosts allow = 192.168.100. 192.168.150. 192.168.200. [......]
The others go right, because as I said it all works
this, but only for the subnet.
- Customers and resolve the server name netbios (wins OK)
However, I encountered only heard the PDC requests only
on its subnet (192.168.200.z).
* Questions:
- Why if the machines are visible between them they are not able to
hear the requests to the PDC?
- Is there another method instead of putting 8 samba servers in each subnet?
Reggard
Marcelo Opazo Vivallos
Chile
Hi. Try to use LMHOSTS file on Windows clients. We had problems when
clients in some routed subnets can not reach the PDC sometimes even
though the WINS was configured OK - and this helped us.
We are using this batch file on Windows:
echo 192.168.x.y PDC_NAME #PRE #DOM:DOMAIN >
%systemroot%\system32\drivers\etc\lmhosts
echo 192.168.x.y "DOMAIN \0x1b" #PRE >>
%systemroot%\system32\drivers\etc\lmhosts
nbtstat -R
Replace PDC_NAME with netbions name of your PDC and DOMAIN with your
domain name and 192.168.x.y with IP of the PDC. Length of record on the
second line must be kept at 16 characters.
Vlastimil Setka
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba
