No, I don't "require auth". I restrict relay to my lan only, and don't see the need
for it. And I'm not a open relay - I'm very aware of that problem.
Maybe "require auth" is your problem as Matt mention to...
The 5.3 prod. will be out in e few weeks I belive... maybe it will do it for you... or
maybe it's just the same :)
Claus
On 13/Mar/2003 01:49:24, Rodney Richison wrote:
> You got it. That is what I want to do. I only want to do backup mx service
> for him. Am using version 5.2. The option is there. I tried a beta before on
> the production server and swore I'd never do that again. :)
>
> Let me ask you something. Do you have "require auth" enabled on these test
> machines? Just curious.
>
>
> Highest Regards,
> __________________________________________________________________ Rodney
> Richison 918-358-1111 www.rcrnet.net +
> __________________________________________________________________
> ----- Original Message -----
> From: "Claus Lund" <[EMAIL PROTECTED]>
> To: "sambar List Member" <[EMAIL PROTECTED]>
> Sent: Thursday, March 13, 2003 1:20 AM
> Subject: [sambar] relay {07}
>
>
> > I belive "Relay Domains" is a new feature in the 5.3 betas, and I have
> been testing it on 2 servers of my own, using one of the latest releases.
> >
> > You just have to add the domain you want to act as bacup for in the
> mail.ini -> Relay Domains. And don't add in as Local Domains.
> >
> > And for the domain that need the backup, you have to add you backup server
> in the mx record.
> >
> > I worked fine for me, but I would like to test it for a server outside my
> lan, so if some one here have a domain for testing, let me know.
> >
> > What Sambar version are you using Rodney?
> >
> > Regards, Claus
> >
> > On 13/Mar/2003 00:22:43, Danny Mallory wrote:
> > > You are somewhat correct in that your mail server could be used as a
> outbound mail relay.. Meaning.. If he goes down then his users could use you
> as an SMTP server to send mail out(allow relaying).. However the check you
> are doing is apparently resolving your ip as one of the MX exchangers which
> means that you are also supposed to be accepting mail for him.. If that is
> the case then you need to setup his accounts so that your mail server will
> accept his mailboxes.. Then figure out how to push the mail back to his
> server when hes back up. Including postmaster.. Hopefully someone else here
> can speak up if I am out of line on making all this work seamlessly to the
> client.
> > >
> > > Danny
> > >
> > > On 12/Mar/2003 23:50:26, Rodney Richison wrote:
> > > > Ok, Let me start all over.
> > > >
> > > > I've a buddy that wants to host his own mail. He wants me to be a
> backup
> > > > mail server for him in case he goes down for awhile.
> > > >
> > > > From what I see in the docs, you should simply put *fineimages.com in
> the
> > > > relay domains. At that point, any and all mail destined for
> fineimages.com
> > > > should be forwarded to his server. This is not happening. Instead,
> sambar is
> > > > rejecting the mail saying the user doesn't exist. There are no users
> on my
> > > > system for fineimages.com. I'm just doing backup relay for him. Or
> trying
> > > > to...
> > > >
> > > >
> > > >
> > > > Highest Regards,
> > > > __________________________________________________________________
> Rodney
> > > > Richison 918-358-1111 www.rcrnet.net +
> > > > __________________________________________________________________
> > > > ----- Original Message -----
> > > > From: "Danny Mallory" <[EMAIL PROTECTED]>
> > > > To: "sambar List Member" <[EMAIL PROTECTED]>
> > > > Sent: Wednesday, March 12, 2003 11:28 PM
> > > > Subject: [sambar] relay {04}
> > > >
> > > >
> > > > > Maybe I am not clear of what all your issues are.. Basically your
> email
> > > > states that you were getting rejects for postmaster.. This is because
> the
> > > > mail server that is being delivered to either
> > > > > a:) does not accept mail for that domain (local domain list)
> > > > > b:) does not have a generic postmaster accept.
> > > > >
> > > > > My statement was that you either have to create a
> [EMAIL PROTECTED]
> > > > for each of your domains or just create a alias as I mentioned that
> will
> > > > accept [EMAIL PROTECTED]
> > > > >
> > > > > Is there something else broken that im not seeing in your message?
> > > > >
> > > > > Danny
> > > > >
> > > > >
> > > > > On 12/Mar/2003 23:11:43, Rodney Richison wrote:
> > > > > > Hi Danny,
> > > > > >
> > > > > > I was not clear. Since I'm doing backup mx for him, shouldn't my
> machine
> > > > > > accept ANY mail going to fineimages.com and hold it for him? I
> should
> > > > have
> > > > > > to set up any mail accounts for him right?
> > > > > >
> > > > > > I put him in local domains to see if that will help. Dang it, I
> know
> > > > this is
> > > > > > simple. I'm just not seeing the light!
> > > > > >
> > > > > > Highest Regards,
> > > > > > __________________________________________________________________
> > > > Rodney
> > > > > > Richison 918-358-1111 <A
> HREF="http://www.rcrnet.net";>www.rcrnet.net</a>
> > > > +
> > > > > > __________________________________________________________________
> > > > > > ----- Original Message -----
> > > > > > From: "Danny Mallory" <[EMAIL PROTECTED]>
> > > > > > To: "sambar List Member" <[EMAIL PROTECTED]>
> > > > > > Sent: Wednesday, March 12, 2003 10:36 PM
> > > > > > Subject: [sambar] relay {02}
> > > > > >
> > > > > >
> > > > > > > create an email alias to cover all your domains.
> > > > > > > ie;
> > > > > > > postmaster = [EMAIL PROTECTED]
> > > > > > >
> > > > > > > It is an RFC requirement for both your mail server and your dns
> > > > servers to
> > > > > > report/allow an authorized administrator.
> > > > > > >
> > > > > > > Danny
> > > > > > >
> > > > > > > On 12/Mar/2003 18:26:22, Rodney Richison wrote:
> > > > > > > > Want to set up backup mx for another guy. Though I entered
> them in
> > > > the
> > > > > > > > relay domain, sambar is giving this:
> > > > > > > >
> > > > > > > > *************************************************
> > > > > > > > ERROR: One or more of your mailservers does not accept mail to
> > > > > > > > [EMAIL PROTECTED] Mailservers are required (RFC822
> 6.3,
> > > > RFC1123
> > > > > > > > 5.2.7, and RFC2821 4.5.1) to accept mail to postmaster.
> > > > > > > >
> > > > > > > > mailserv.rcrnet.net's postmaster response:
> > > > > > > >
> > > > > > > > >>> RCPT TO: <[EMAIL PROTECTED]>
> > > > > > > >
> > > > > > > > <<< 501 Invalid mail recipient. Relay requires SMTP AUTH.
> > > > > > > > ***************************************************
> > > > > > > >
> > > > > > > > What am I forgetting to do gentlemen?
> > > > > > > > -------------------------------------------------------
> > > > > > > > To unsubscribe please go to <A TARGET="_blank"
> > > > > > HREF="http://www.sambar.ch/list/";>http://www.sambar.ch/list/</a>
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > -------------------------------------------------------
> > > > > > > To unsubscribe please go to <A TARGET="_blank"
> > > > HREF="http://www.sambar.ch/list/";>http://www.sambar.ch/list/</a>
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > -------------------------------------------------------
> > > > > > To unsubscribe please go to <A TARGET="_blank"
> > > > HREF="http://www.sambar.ch/list/";>http://www.sambar.ch/list/</a>
> > > > > >
> > > > > >
> > > > > >
> > > > > -------------------------------------------------------
> > > > > To unsubscribe please go to http://www.sambar.ch/list/
> > > > >
> > > > >
> > > > >
> > > > -------------------------------------------------------
> > > > To unsubscribe please go to http://www.sambar.ch/list/
> > > >
> > > >
> > > >
> > > -------------------------------------------------------
> > > To unsubscribe please go to http://www.sambar.ch/list/
> > >
> > >
> > >
> > -------------------------------------------------------
> > To unsubscribe please go to http://www.sambar.ch/list/
> >
> >
> >
> -------------------------------------------------------
> To unsubscribe please go to http://www.sambar.ch/list/
>
>
>
-------------------------------------------------------
To unsubscribe please go to http://www.sambar.ch/list/
