Well, as you said.. SSH is the ultimate solution.. I have been rolling Linux boxes out 
at just about every location we have and using it to hit VNC on the inside.. We have 
customers also that use it for port forwarding to As/400s for TN52520 etc.. Much 
easier and safer than a true VPN.

I really love running the vnc client from linux the best.. You can nail up a SSH 
connection and VNC all in one swoop.

vncviewer -via [EMAIL PROTECTED] 192.168.x.x:0

Danny

On 19/Mar/2004 07:20:30, Jeff Adams  wrote:
> There are a number of solutions available for tunneling VNC traffic through 
> a secure shell, thus creating a secure end-to-end connection.  UltraVNC has 
> a plug-in (DLL) mechanism for modifying the data stream; there is an RC4 
> (40-bit, 56-bit, and 128-bit) encryption plug-in available. Tridia VNC Pro 
> (not a free solution - $49 per license) uses 1,028-bit encryption.
> 
> -Jeff
> 
> At 10:41 AM 03/18/2004, Danny Mallory wrote:
> 
> >Typically the ISPs dhcp range won't change too much.. You might be able to 
> >use a wildcard to cover that range and simply trust that noone else on 
> >"that" subnet is going to be malicious... However, I would recommend 
> >getting some remote software installed on the system like pcANYwhere so 
> >that you could remote in and use the local browser to hit 127.0.0.1.. Just 
> >BE SURE to secure your remote software the best it can be. With pcanywhere 
> >that would be require symetric encryption.. I wouldn't consider using VNC 
> >for such a thing since the data transport is un-encrypted.
> >
> >Danny
> >
> >On 18/Mar/2004 08:30:49, David Martin - Ivy League Software wrote:
> > > Up until I started using my off-site server my Sambar server was on my 
> > local
> > > net ... so I could use 10.0.0.* as an IP restriction but now with it half
> > > way across the country ... and my ISP has many different subnets ... 
> > without
> > > being able to use a FQDN the remote access features are useless to me ...
> > > unless I am missing something else.
> > >
> > > I use Dynamic DNS to point a FQDN to my DSLs current IP ... so if you go to
> > > office.mydomain.com it will go to my offices Dynamic DSL IP but if you 
> > go to
> > > www.mydomain.com it goes to the dedicated server.
> > >
> > > David Martin
> > > Ivy League Software
> 
> -------------------------------------------------------
> To unsubscribe please go to http://www.sambar.ch/list/
> 
> 
> 
> 
> 
> 
> 






-------------------------------------------------------
To unsubscribe please go to http://www.sambar.ch/list/



Reply via email to