Hi, I now have 2 ancient scanners. An Epson Perfection scanner and a DiMage Scan Dual III (Minolta) slide scanner.
My desktop is ubuntu 16.04 on a Dell. The Epson Scanner has worked fine (except when the power adapter failed...) The Minolta Slide scanner, not yet. The sane-find-scanner reports: sane-find-scanner | grep Minolta found USB scanner (vendor=0x0686 [MINOLTA], product=0x400d [DiMAGE Scan Dual3]) at libusb:001:006 I've updated sane to this version of the backends: scanimage -V scanimage (sane-backends) 1.0.27git; backend version 1.0.27 xsane is slow to start, first shows a histogram window, then a preview window, then the save/configure window. Then xsane hangs and pop-up error messages appear. Today, xsane crashed and left a report, maybe this was mailed someplace.... I usualy close the application before it crashes... Here is an invocation of xsane with these environment settings. I've deleted lines that seem to repeat very similar info. SANE_DEBUG_SANEI_USB=1 SANE_DEBUG_AVISION=1 =============== [avision] get_frame_info: read failed (Error during device I/O) [sanei_usb] sanei_usb_write_bulk: write failed: Operation timed out [sanei_usb] sanei_usb_read_bulk: read failed: Operation timed out [avision] get_button_status: read failed (Error during device I/O) [avision] sane_compute_parameters: hw_xres: 150, hw_yres: 150, line_difference: 0 [avision] sane_compute_parameters: tlx: 0, tly: 0, brx: 143, bry: 214 [avision] sane_compute_parameters: hw_pixel_per_line: 140, hw_lines: 214, hw_bytes_per_line: 420 [avision] sane_compute_parameters: xres: 150, yres: 150 [avision] sane_compute_parameters: pixel_per_line: 140, lines: 214 [avision] sane_compute_parameters: depth: 8, bytes_per_line: 420 [avision] sane_compute_parameters: hw_xres: 150, hw_yres: 150, line_difference: 0 [avision] sane_compute_parameters: tlx: 0, tly: 0, brx: 143, bry: 214 [avision] sane_compute_parameters: hw_pixel_per_line: 140, hw_lines: 214, hw_bytes_per_line: 420 [avision] sane_compute_parameters: xres: 150, yres: 150 [avision] sane_compute_parameters: pixel_per_line: 140, lines: 214 [avision] sane_compute_parameters: depth: 8, bytes_per_line: 420 [avision] sane_compute_parameters: hw_xres: 150, hw_yres: 150, line_difference: 0 [avision] sane_compute_parameters: tlx: 0, tly: 0, brx: 143, bry: 214 [avision] sane_compute_parameters: hw_pixel_per_line: 140, hw_lines: 214, hw_bytes_per_line: 420 [avision] sane_compute_parameters: xres: 150, yres: 150 [avision] sane_compute_parameters: pixel_per_line: 140, lines: 214 [avision] sane_compute_parameters: depth: 8, bytes_per_line: 420 [avision] sane_compute_parameters: hw_xres: 150, hw_yres: 150, line_difference: 0 [avision] sane_compute_parameters: tlx: 94, tly: 156, brx: 143, bry: 214 [avision] sane_compute_parameters: hw_pixel_per_line: 48, hw_lines: 58, hw_bytes_per_line: 420 [avision] sane_compute_parameters: xres: 150, yres: 150 [avision] sane_compute_parameters: pixel_per_line: 48, lines: 58 [avision] sane_compute_parameters: depth: 8, bytes_per_line: 144 [sanei_usb] sanei_usb_write_bulk: write failed: Operation timed out [sanei_usb] sanei_usb_read_bulk: read failed: Operation timed out [avision] get_frame_info: read failed (Error during device I/O) Killed katie@towhee:~$ katie@towhee:~$ katie@towhee:~$ !v vi crashXsane.txt katie@towhee:~$ mv crashXsane.txt failedXsane.txt katie@towhee:~$ clear katie@towhee:~$ more failedXsane.txt katie@towhee:~$ xsane [sanei_debug] Setting debug level of sanei_usb to 1. [sanei_usb] libusb_scan_devices: skipping device 0x1d6b/0x0003 at 002:001: cannot open: Access denied (insufficien t permissions) [sanei_usb] libusb_scan_devices: skipping device 0x8087/0x0a2b at 001:002: cannot open: Access denied (insufficien t permissions) [sanei_usb] libusb_scan_devices: skipping device 0x1bcf/0x2b95 at 001:003: cannot open: Access denied (insufficien t permissions) [sanei_usb] libusb_scan_devices: skipping device 0x045e/0x00e1 at 001:004: cannot open: Access denied (insufficien t permissions) [sanei_usb] libusb_scan_devices: skipping device 0x1d6b/0x0002 at 001:001: cannot open: Access denied (insufficien t permissions) [sanei_debug] Setting debug level of avision to 1. [sanei_debug] Setting debug level of sanei_usb to 1. [sanei_usb] libusb_scan_devices: skipping device 0x1d6b/0x0003 at 002:001: cannot open: Access denied (insufficien t permissions) [sanei_usb] libusb_scan_devices: skipping device 0x8087/0x0a2b at 001:002: cannot open: Access denied (insufficien t permissions) [sanei_usb] libusb_scan_devices: skipping device 0x1bcf/0x2b95 at 001:003: cannot open: Access denied (insufficien t permissions) [sanei_usb] libusb_scan_devices: skipping device 0x045e/0x00e1 at 001:004: cannot open: Access denied (insufficien t permissions) [sanei_usb] libusb_scan_devices: skipping device 0x1d6b/0x0002 at 001:001: cannot open: Access denied (insufficien t permissions) [avision] sane_reload_devices: Trying to find USB device 0638 0a27 ... [avision] sane_reload_devices: Trying to find USB device 0638 0a3c ... [avision] sane_reload_devices: Trying to find USB device 0638 0a33 ... [[[[ deleted about 30 lines ]]]] [avision] sane_reload_devices: Trying to find USB device 0686 4004 ... [avision] sane_reload_devices: Trying to find USB device 0686 400d ... [avision] filling command to have a length of 10, was: 6 [avision] attach: Inquiry gives mfg=MINOLTA, model=FS-V3, product revision=1.10. [avision] attach: Checking model: 0 [avision] attach: Checking model: 1 [[[[ deleted about 70 lines ]]]] [avision] attach: Checking model: 71 [avision] attach: Checking model: 72 [avision] attach: Checking model: 73 [avision] attach: Checking model: 74 [avision] attach: Checking model: 75 [avision] attach: Checking model: 76 [avision] attach: Scanner matched entry: 76: "MINOLTA", "FS-V3", 0x0686, 0x400d [avision] filling command to have a length of 10, was: 6 [avision] filling command to have a length of 10, was: 6 [avision] Inquiry optical resolution > max_resolution, adjusting! [avision] attach: optical resolution set to: 2820 dpi [avision] attach: max resolution set to: 2820 dpi [avision] attach: max channels per pixel: 3, max bits per channel: 16 [avision] attach: Mode 0 range is now: 24.311064 x 36.316596 mm. [avision] attach: x/y-range for mode 1 is invalid! Using a default. [avision] attach: Mode 1 range is now: 215.900000 x 299.720000 mm. [avision] attach: Mode 2 range is now: 24.311064 x 36.316596 mm. [avision] sane_reload_devices: Trying to find USB device 0686 400e ... [avision] sane_reload_devices: Trying to find USB device 0638 0a15 ... [avision] sane_reload_devices: Trying to find USB device 0638 0a16 ... [avision] sane_reload_devices: Trying to find USB device 04c5 1029 ... [avision] sane_reload_devices: Trying to find USB device 04c5 10ef ... [avision] sane_reload_devices: Trying to find USB device 040a 6001 ... [avision] sane_reload_devices: Trying to find USB device 040a 6002 ... [avision] sane_reload_devices: Trying to find USB device 040a 6003 ... [avision] sane_reload_devices: Trying to find USB device 040a 6004 ... [avision] sane_reload_devices: Trying to find USB device 040a 6005 ... [avision] sane_reload_devices: Trying to find USB device 0638 0268 ... [avision] sane_reload_devices: Trying to find USB device 04a7 0424 ... [avision] sane_reload_devices: Trying to find USB device 04a7 0491 ... [avision] sane_reload_devices: Trying to find USB device 04a7 0479 ... [avision] sane_reload_devices: Trying to find USB device 04a7 048f ... [avision] sane_reload_devices: Trying to find USB device 04a7 0420 ... [avision] sane_reload_devices: Trying to find USB device 04a7 0421 ... [avision] sane_reload_devices: Trying to find USB device 04a7 047a ... [avision] sane_reload_devices: Trying to find USB device 04a7 0422 ... [avision] sane_reload_devices: Trying to find USB device 04a7 0390 ... [avision] sane_reload_devices: Trying to find USB device 04a7 047b ... [avision] sane_reload_devices: Trying to find USB device 04a7 0423 ... [avision] sane_reload_devices: Trying to find USB device 04a7 0493 ... [avision] sane_reload_devices: Trying to find USB device 04a7 0497 ... [avision] sane_reload_devices: Trying to find USB device 04a7 0498 ... [avision] sane_reload_devices: Trying to find USB device 04a7 0499 ... [avision] sane_reload_devices: Trying to find USB device 04a7 049c ... [avision] sane_reload_devices: Trying to find USB device 04a7 0477 ... [avision] sane_reload_devices: Trying to find USB device 04a7 049d ... [avision] sane_reload_devices: Trying to find USB device 04a7 0448 ... [avision] sane_reload_devices: Trying to find USB device 04a7 0490 ... [avision] sane_reload_devices: Trying to find USB device 04a7 0449 ... [avision] sane_reload_devices: Trying to find USB device 04a7 048c ... [avision] sane_reload_devices: Trying to find USB device 04a7 0476 ... [avision] sane_reload_devices: Trying to find USB device 04a7 044c ... [avision] sane_reload_devices: Trying to find USB device 04a7 048d ... [avision] sane_reload_devices: Trying to find USB device 04a7 04a7 ... [avision] sane_reload_devices: Trying to find USB device 04a7 0475 ... [avision] sane_reload_devices: Trying to find USB device 04a7 048e ... [avision] sane_reload_devices: Trying to find USB device 04a7 0446 ... [avision] sane_reload_devices: Trying to find USB device 04a7 0495 ... [avision] sane_reload_devices: Trying to find USB device 04a7 047c ... [avision] sane_reload_devices: Trying to find USB device 04a7 0447 ... [avision] sane_reload_devices: Trying to find USB device 04a7 0492 ... [avision] sane_reload_devices: Trying to find USB device 04a7 0478 ... [avision] sane_reload_devices: Trying to find USB device 04a7 049a ... [avision] sane_reload_devices: Trying to find USB device 0482 0335 ... [sanei_debug] Setting debug level of sanei_usb to 1. [sanei_usb] libusb_scan_devices: skipping device 0x1d6b/0x0003 at 002:001: cannot open: Access denied (insufficien t permissions) [sanei_usb] libusb_scan_devices: skipping device 0x8087/0x0a2b at 001:002: cannot open: Access denied (insufficien t permissions) [sanei_usb] libusb_scan_devices: skipping device 0x1bcf/0x2b95 at 001:003: cannot open: Access denied (insufficien t permissions) [sanei_usb] libusb_scan_devices: skipping device 0x045e/0x00e1 at 001:004: cannot open: Access denied (insufficien t permissions) [sanei_usb] libusb_scan_devices: skipping device 0x1d6b/0x0002 at 001:001: cannot open: Access denied (insufficien t permissions) [avision] sane_reload_devices: Trying to find USB device 0638 0a27 ... [avision] sane_reload_devices: Trying to find USB device 0638 0a3c ... [[[deleted 80 lines ]]] [avision] sane_reload_devices: Trying to find USB device 04a7 048e ... [avision] sane_reload_devices: Trying to find USB device 04a7 0446 ... [avision] sane_reload_devices: Trying to find USB device 04a7 0495 ... [avision] sane_reload_devices: Trying to find USB device 04a7 047c ... [avision] sane_reload_devices: Trying to find USB device 04a7 0447 ... [avision] sane_reload_devices: Trying to find USB device 04a7 0492 ... [avision] sane_reload_devices: Trying to find USB device 04a7 0478 ... [avision] sane_reload_devices: Trying to find USB device 04a7 049a ... [avision] sane_reload_devices: Trying to find USB device 0482 0335 ... [avision] sane_open: using open_extended [avision] sane_open: got 1048576 scsi_max_request_size [avision] filling command to have a length of 10, was: 6 [avision] filling command to have a length of 10, was: 6 [avision] init_options: dpi_range.min set to 50 [avision] sane_open: temporary fname for duplex scans: /tmp/avision-rear-OS444T [avision] sane_open: early calibration for film scanner. [avision] sane_compute_parameters: hw_xres: 2820, hw_yres: 2820, line_difference: 0 [avision] sane_compute_parameters: tlx: 0, tly: 0, brx: 2664, bry: 3996 [avision] sane_compute_parameters: hw_pixel_per_line: 2664, hw_lines: 3996, hw_bytes_per_line: 0 [avision] sane_compute_parameters: xres: 2820, yres: 2820 [avision] sane_compute_parameters: pixel_per_line: 2664, lines: 3996 [avision] sane_compute_parameters: depth: 8, bytes_per_line: 7992 [avision] set_window: [avision] normal_calibration: [avision] normal_calibration: reading dark data [avision] sort_and_average: [avision] sort_and_average: [avision] normal_calibration: dark data present - decreasing white average data [avision] object_position: 2 [avision] Got 1 byte - status? (8) Resending. [avision] Got 1 byte - status? (8) Resending. [avision] Got 1 byte - status? (8) Resending. [avision] Max retry count reached: I/O error [avision] get_button_status: read failed (Error during device I/O) [avision] sane_compute_parameters: hw_xres: 150, hw_yres: 150, line_difference: 0 [avision] sane_compute_parameters: tlx: 0, tly: 0, brx: 141, bry: 212 [avision] sane_compute_parameters: hw_pixel_per_line: 140, hw_lines: 212, hw_bytes_per_line: 7992 [avision] sane_compute_parameters: xres: 150, yres: 150 [avision] sane_compute_parameters: pixel_per_line: 140, lines: 212 [avision] sane_compute_parameters: depth: 8, bytes_per_line: 420 [sanei_usb] sanei_usb_write_bulk: write failed: Operation timed out [sanei_usb] sanei_usb_write_bulk: write failed: Operation timed out [sanei_usb] sanei_usb_read_bulk: read failed: Operation timed out [avision] set_power_save_time: send_data (Error during device I/O) [sanei_usb] sanei_usb_write_bulk: write failed: Operation timed out [sanei_usb] sanei_usb_read_bulk: read failed: Operation timed out [avision] set_power_save_time: send_data (Error during device I/O) [avision] sane_compute_parameters: hw_xres: 150, hw_yres: 150, line_difference: 0 [avision] sane_compute_parameters: tlx: 0, tly: 0, brx: 143, bry: 214 [avision] sane_compute_parameters: hw_pixel_per_line: 140, hw_lines: 214, hw_bytes_per_line: 420 [avision] sane_compute_parameters: xres: 150, yres: 150 [avision] sane_compute_parameters: pixel_per_line: 140, lines: 214 [avision] sane_compute_parameters: depth: 8, bytes_per_line: 420 [avision] sane_compute_parameters: hw_xres: 150, hw_yres: 150, line_difference: 0 [avision] sane_compute_parameters: tlx: 0, tly: 0, brx: 143, bry: 214 [avision] sane_compute_parameters: hw_pixel_per_line: 140, hw_lines: 214, hw_bytes_per_line: 420 [avision] sane_compute_parameters: xres: 150, yres: 150 [avision] sane_compute_parameters: pixel_per_line: 140, lines: 214 [avision] sane_compute_parameters: depth: 8, bytes_per_line: 420 [sanei_usb] sanei_usb_write_bulk: write failed: Operation timed out [sanei_usb] sanei_usb_read_bulk: read failed: Operation timed out [avision] get_frame_info: read failed (Error during device I/O) [sanei_usb] sanei_usb_write_bulk: write failed: Operation timed out [sanei_usb] sanei_usb_read_bulk: read failed: Operation timed out [avision] get_button_status: read failed (Error during device I/O) [avision] sane_compute_parameters: hw_xres: 150, hw_yres: 150, line_difference: 0 [avision] sane_compute_parameters: tlx: 0, tly: 0, brx: 143, bry: 214 [avision] sane_compute_parameters: hw_pixel_per_line: 140, hw_lines: 214, hw_bytes_per_line: 420 [avision] sane_compute_parameters: xres: 150, yres: 150 [avision] sane_compute_parameters: pixel_per_line: 140, lines: 214 [avision] sane_compute_parameters: depth: 8, bytes_per_line: 420 [avision] sane_compute_parameters: hw_xres: 150, hw_yres: 150, line_difference: 0 [avision] sane_compute_parameters: tlx: 0, tly: 0, brx: 143, bry: 214 [avision] sane_compute_parameters: hw_pixel_per_line: 140, hw_lines: 214, hw_bytes_per_line: 420 [avision] sane_compute_parameters: xres: 150, yres: 150 [avision] sane_compute_parameters: pixel_per_line: 140, lines: 214 [avision] sane_compute_parameters: depth: 8, bytes_per_line: 420 [avision] sane_compute_parameters: hw_xres: 150, hw_yres: 150, line_difference: 0 [avision] sane_compute_parameters: tlx: 0, tly: 0, brx: 143, bry: 214 [avision] sane_compute_parameters: hw_pixel_per_line: 140, hw_lines: 214, hw_bytes_per_line: 420 [avision] sane_compute_parameters: xres: 150, yres: 150 [avision] sane_compute_parameters: pixel_per_line: 140, lines: 214 [avision] sane_compute_parameters: depth: 8, bytes_per_line: 420 [avision] sane_compute_parameters: hw_xres: 150, hw_yres: 150, line_difference: 0 [avision] sane_compute_parameters: tlx: 94, tly: 156, brx: 143, bry: 214 [avision] sane_compute_parameters: hw_pixel_per_line: 48, hw_lines: 58, hw_bytes_per_line: 420 [avision] sane_compute_parameters: xres: 150, yres: 150 [avision] sane_compute_parameters: pixel_per_line: 48, lines: 58 [avision] sane_compute_parameters: depth: 8, bytes_per_line: 144 [sanei_usb] sanei_usb_write_bulk: write failed: Operation timed out [sanei_usb] sanei_usb_read_bulk: read failed: Operation timed out [avision] get_frame_info: read failed (Error during device I/O) katie@towhee:~$ ============================= fingers crossed that the error is in my setup and thus, easily corrected. Katie Urey
-- sane-devel mailing list: [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to [email protected]
