Hi all,
I have a Visioneer 9520 Photo Scanner which is in the One Touch line. It has a
GL843 chip so I'll obviously need to add it to the genesys driver. The scanner
is a flatbed that's a bit wider than US Letter and about 0.7" longer. It's
Windoze drivers support document scan up to 2400 and film/transparency to
4800x9600. It is 48-bit color, 16-bit grayscale and b/w. The specs say it scan
dimensions are 8.5 x 11.69 inches (21.6 x 29.7 cm) though it seems like it's a
touch wider than that.
I'll work out the final detail if someone has a reference site or device that
can help me with the parameters that are likely to work to get started. I
initially made the avision driver recognize it to get the chip info since so
many of the Visioneer products are avision based chips, but that of course
turned out wrong.
Output of sane-find-scanner -v -v is attached.
Any suggestions for a similar genesys (or compat) scanner for me to start with?
Best regards,Eric
This is sane-find-scanner from sane-backends 1.0.27git
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
searching for SCSI scanners:
checking /dev/scanner... failed to open (Invalid argument)
checking /dev/sg0... failed to open (Access to resource has been denied)
checking /dev/sg1... failed to open (Invalid argument)
checking /dev/sg2... failed to open (Invalid argument)
checking /dev/sg3... failed to open (Invalid argument)
checking /dev/sg4... failed to open (Invalid argument)
checking /dev/sg5... failed to open (Invalid argument)
checking /dev/sg6... failed to open (Invalid argument)
checking /dev/sg7... failed to open (Invalid argument)
checking /dev/sg8... failed to open (Invalid argument)
checking /dev/sg9... failed to open (Invalid argument)
checking /dev/sga... failed to open (Invalid argument)
checking /dev/sgb... failed to open (Invalid argument)
checking /dev/sgc... failed to open (Invalid argument)
checking /dev/sgd... failed to open (Invalid argument)
checking /dev/sge... failed to open (Invalid argument)
checking /dev/sgf... failed to open (Invalid argument)
checking /dev/sgg... failed to open (Invalid argument)
checking /dev/sgh... failed to open (Invalid argument)
checking /dev/sgi... failed to open (Invalid argument)
checking /dev/sgj... failed to open (Invalid argument)
checking /dev/sgk... failed to open (Invalid argument)
checking /dev/sgl... failed to open (Invalid argument)
checking /dev/sgm... failed to open (Invalid argument)
checking /dev/sgn... failed to open (Invalid argument)
checking /dev/sgo... failed to open (Invalid argument)
checking /dev/sgp... failed to open (Invalid argument)
checking /dev/sgq... failed to open (Invalid argument)
checking /dev/sgr... failed to open (Invalid argument)
checking /dev/sgs... failed to open (Invalid argument)
checking /dev/sgt... failed to open (Invalid argument)
checking /dev/sgu... failed to open (Invalid argument)
checking /dev/sgv... failed to open (Invalid argument)
checking /dev/sgw... failed to open (Invalid argument)
checking /dev/sgx... failed to open (Invalid argument)
checking /dev/sgy... failed to open (Invalid argument)
checking /dev/sgz... failed to open (Invalid argument)
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
searching for USB scanners:
checking /dev/usb/scanner... failed to open (Invalid argument)
checking /dev/usb/scanner0... failed to open (Invalid argument)
checking /dev/usb/scanner1... failed to open (Invalid argument)
checking /dev/usb/scanner2... failed to open (Invalid argument)
checking /dev/usb/scanner3... failed to open (Invalid argument)
checking /dev/usb/scanner4... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner7... failed to open (Invalid argument)
checking /dev/usb/scanner8... failed to open (Invalid argument)
checking /dev/usb/scanner9... failed to open (Invalid argument)
checking /dev/usb/scanner10... failed to open (Invalid argument)
checking /dev/usb/scanner11... failed to open (Invalid argument)
checking /dev/usb/scanner12... failed to open (Invalid argument)
checking /dev/usb/scanner13... failed to open (Invalid argument)
checking /dev/usb/scanner14... failed to open (Invalid argument)
checking /dev/usb/scanner15... failed to open (Invalid argument)
checking /dev/usbscanner... failed to open (Invalid argument)
checking /dev/usbscanner0... failed to open (Invalid argument)
checking /dev/usbscanner1... failed to open (Invalid argument)
checking /dev/usbscanner2... failed to open (Invalid argument)
checking /dev/usbscanner3... failed to open (Invalid argument)
checking /dev/usbscanner4... failed to open (Invalid argument)
checking /dev/usbscanner5... failed to open (Invalid argument)
checking /dev/usbscanner6... failed to open (Invalid argument)
checking /dev/usbscanner7... failed to open (Invalid argument)
checking /dev/usbscanner8... failed to open (Invalid argument)
checking /dev/usbscanner9... failed to open (Invalid argument)
checking /dev/usbscanner10... failed to open (Invalid argument)
checking /dev/usbscanner11... failed to open (Invalid argument)
checking /dev/usbscanner12... failed to open (Invalid argument)
checking /dev/usbscanner13... failed to open (Invalid argument)
checking /dev/usbscanner14... failed to open (Invalid argument)
checking /dev/usbscanner15... failed to open (Invalid argument)
trying libusb:
could not open USB device 0x1d6b/0x0001 at 005:001: Access denied (insufficient
permissions)
could not open USB device 0x04f2/0xb444 at 002:002: Access denied (insufficient
permissions)
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied (insufficient
permissions)
could not open USB device 0x1d6b/0x0001 at 004:001: Access denied (insufficient
permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient
permissions)
could not open USB device 0x046d/0xc52f at 003:002: Access denied (insufficient
permissions)
could not open USB device 0x1d6b/0x0001 at 003:001: Access denied (insufficient
permissions)
could not open USB device 0x1d6b/0x0003 at 009:001: Access denied (insufficient
permissions)
<device descriptor of 0x04a7/0x0480 at 008:003 (Visioneer USB Scanner)>
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255
bDeviceSubClass 255
bDeviceProtocol 255
bMaxPacketSize0 64
idVendor 0x04A7
idProduct 0x0480
bcdDevice 5.00
iManufacturer 3 (Visioneer)
iProduct 5 (USB Scanner)
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 192 (Self-powered)
MaxPower 10 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255
bInterfaceSubClass 255
bInterfaceProtocol 255
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 2>
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 8 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
checking for LM983[1,2,3] ...
this is not a LM983x (bcdUSB = 0x200)
checking for GT-6801 ...
this is not a GT-6801 (bcdUSB = 0x200)
checking for GT-6816 ...
this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GLxxx ...
this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255)
<This USB chip looks like a GL843 (result from sane-backends 1.0.27git)>
found USB scanner (vendor=0x04a7 [Visioneer], product=0x0480 [USB Scanner],
chip=GL843) at libusb:008:003
could not open USB device 0x1d6b/0x0002 at 008:001: Access denied (insufficient
permissions)
could not open USB device 0x1d6b/0x0003 at 007:001: Access denied (insufficient
permissions)
could not open USB device 0x1d6b/0x0002 at 006:001: Access denied (insufficient
permissions)
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
done
--
sane-devel mailing list: [email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to [email protected]
