Hello, Rather than cross post, I have opened a macports ticket
https://trac.macports.org/ticket/58274 <https://trac.macports.org/ticket/58274> Will update this end if I get a solution. Regards Tony > On 30 Mar 2019, at 15:50, Tony Kinyua <[email protected]> wrote: > > Hi Umberto, > > Open a new thread and I will walk you through my setup and how I got it > working before the upgrade. You can CC me in the new thread. Please don’t > reply to this one unless specifically addressing the dbus, avahi issue etc > that am experiencing. > > Regards > Tony > >> On 30 Mar 2019, at 13:32, Umberto Cerrato <[email protected]> wrote: >> >> So many “too”s. >> >> Anyway I tried just now. I’m getting my usual error (“device […] is not >> configured”). So, again, unfortunately I cannot help you :/ >> >> Keep us updated. >> >> Best >> >>> Il giorno 30 mar 2019, alle ore 11:27, Umberto Cerrato >>> <[email protected]> ha scritto: >>> >>> Hi, >>> >>> Yes, you are right. I’m sorry. >>> >>>> Il giorno 30 mar 2019, alle ore 11:21, Tony Kinyua <[email protected]> ha >>>> scritto: >>>> >>>> Hi Umberto, >>>> >>>> I would suggest you start another thread with your particular issues so >>>> that we can separate it from mine. I will be glad to assist where I can. >>>> >>>> Regards >>>> Tony >>>> >>>>> On 30 Mar 2019, at 12:56, Umberto Cerrato <[email protected]> >>>>> wrote: >>>>> >>>>> Hi Tony, >>>>> >>>>> I tried but it didn’t work. I’m giving it another try today. >>>>> Thank you. >>>>> >>>>> Best, >>>>> Umberto >>>>> >>>>>> Il giorno 30 mar 2019, alle ore 08:55, Tony Kinyua <[email protected]> ha >>>>>> scritto: >>>>>> >>>>>> >>>>>> >>>>>>> On 30 Mar 2019, at 02:34, Umberto Cerrato <[email protected]> >>>>>>> wrote: >>>>>>> >>>>>>> Hi Tony. >>>>>>> >>>>>>> Unfortunately I cannot help you, since I never had this error. >>>>>>> But I take the chance to ask you how did you installed sane-backends on >>>>>>> macOS? >>>>>> Umberto, >>>>>> >>>>>> I use sane-backends via the Macports environment >>>>>> (https://www.macports.org). I believe sane-backends should also be >>>>>> available via Homebrew though I don’t use that environment >>>>>> (https://formulae.brew.sh/formula/sane-backends). >>>>>> >>>>>> In my case its a simple command to have sane-backends installed >>>>>> >>>>>> sudo port install sane-backends >>>>>> >>>>>> Regards >>>>>> Tony >>>>>>> >>>>>>> Please, I really need it. And many people are in need too. >>>>>>> >>>>>>> Thank you in advance >>>>>>> Umberto >>>>>>> >>>>>>> Inviato da iPhone >>>>>>> >>>>>>>> Il giorno 30 mar 2019, alle ore 00:29, Tony Kinyua <[email protected]> >>>>>>>> ha scritto: >>>>>>>> >>>>>>>> Hello, >>>>>>>> >>>>>>>> I have an issue with sane on Mac OS. The setup was previously working >>>>>>>> (net) perfectly but yesterday after upgrading to Version 10.14.4 >>>>>>>> (18E226) (Mojave) xsane and scanimage are crashing immediately after >>>>>>>> being started with the following error. >>>>>>>> >>> >>> Trying to taking the discussion back to the main issue… >>> >>> I’m on macOS 10.14.4 (18E226) too. I installed sane-backends too >>> (MacPorts). I’ll let you if I’m getting the same error too. >>> >>>>>>>> bash-3.2$ scanimage -L >>>>>>>> dbus[57659]: Dynamic session lookup supported but failed: launchd did >>>>>>>> not provide a socket path, verify that >>>>>>>> org.freedesktop.dbus-session.plist is loaded! >>>>>>>> >>>>>>>> After setting up debug more information is provided. >>>>>>>> >>>>>>>> bash-3.2$ SANE_DEBUG_NET=3 scanimage -L >>>>>>>> [sanei_debug] Setting debug level of net to 3. >>>>>>>> [net] sane_init: authorize != null, version_code != null >>>>>>>> >>>>>>>> [net] net_avahi_init: could not create Avahi client: Memory exhausted >>>>>>>> [net] net_avahi_init: Avahi init failed, support disabled >>>>>>>> [net] sane_init: SANE net backend version 1.0.14 (AF-indep+IPv6) from >>>>>>>> sane-backends 1.0.27 >>>>>>>> [net] sane_init: Client has little endian byte order >>>>>>>> [net] sane_init: searching for config file >>>>>>>> [net] sane_init: done reading config >>>>>>>> [net] sane_init: evaluating environment variable SANE_NET_HOSTS >>>>>>>> [net] sane_init: evaluating environment variable SANE_NET_TIMEOUT >>>>>>>> [net] sane_init: done >>>>>>>> [net] sane_get_devices: local_only = 0 >>>>>>>> [net] sane_get_devices: finished (0 devices) >>>>>>>> >>>>>>>> No scanners were identified. If you were expecting something different, >>>>>>>> check that the scanner is plugged in, turned on and detected by the >>>>>>>> sane-find-scanner tool (if appropriate). Please read the documentation >>>>>>>> which came with this software (README, FAQ, manpages). >>>>>>>> [net] sane_exit: exiting >>>>>>>> [net] sane_exit: finished. >>>>>>>> >>>>>>>> Anyone come across this issue? >>>>>>>> >>>>>>>> Regards >>>>>>>> Tony >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> sane-devel mailing list: [email protected] >>>>>>>> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/sane-devel >>>>>>>> Unsubscribe: Send mail with subject "unsubscribe your_password" >>>>>>>> to [email protected] >> > > > -- > sane-devel mailing list: [email protected] > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe your_password" > to [email protected]
-- sane-devel mailing list: [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to [email protected]
