пʼятниця, 22 листопада 2019 р. 22:10:26 EET Monosij Dutta-Roy написано: > Hi Sane-Devel - > > Your help with not detecting Epson V600 will be much appreciated. Installed > with the scanner connected, power on. > > I just downloaded latest linux drivers from Epson, v 2.30.4 created 20 > AUG.2019. > http://support.epson.net/linux/en/iscan.php?model=gt-x820&version=2.30.4 > > During installation, by the install script (attached) everything seemed to > go ok except for this message: > ... > Unpacking iscan-plugin-gt-x820 (2.2.1-1) over (2.2.1-1) ... > Setting up iscan-data (1.39.1-2) ... > > > *expr: syntax error: missing argument after ‘-’tail: invalid number of > lines: ‘/lib/udev/rules.d/60-libsane.rules’*Setting up iscan (2.30.4-2) ... > Setting up iscan-plugin-gt-x820 (2.2.1-1) ... > ... > scanimage -L returns: > No scanners were identified. If you were expecting something different, > check that the scanner is plugged in, turned on and detected by the > sane-find-scanner tool (if appropriate). Please read the documentation > which came with this software (README, FAQ, manpages). > ... > scanimage -T returns: > scanimage: no SANE devices found > ... > Would be really great to understand how to best fix. I can run any > necessary commands and get back to you. > > Thank you for your help. > > Mono
Hi, Please try to do as follows 1. Attach your scanner and turn it on. 2. Run 'sane-find-scanner'. You should see something like found USB scanner (vendor=0x04b8 [EPSON], product=0x0142 [EPSON Perfection V33/V330]) at libusb:002:006 (these are for my EPSON Perfection V33/V330, yours output should be different) 3. From root run (via sudo) iscan-registry --add interpreter usb 0x04b8 0x0142 /usr/lib/esci/libesci- interpreter-perfection-v600 (replace "0x04b8 0x0142" with your data) 4. Check if there is registration file, /var/lib/iscan/interpreter, with the following data interpreter usb 0xXXXX 0xXXXX /usr/lib/esci/libesci-interpreter-perfection- v600 You can use iscan-registry -r interpreter usb 0xXXXX 0xXXXX /usr/lib/esci/libesci- interpreter-perfection-v600 to remove duplicate registrations. 5. Run 'iscan' to check if the scanner works. Hope this helps. Best regards, Yuri
