On 4/2/20 4:42 PM, Goran Vukoman wrote:
I will need some days until I install a new Linux-version (Sane 1.0.29)
What I recommend you doesn't require installation of new Linux version.
Am Donnerstag, den 02.04.2020, 16:13 +0300 schrieb Alexander Pevzner:
On 4/2/20 3:36 PM, Goran Vukoman wrote:
$ ~/go/bin/airscan-discover
[devices]
"EPSON WF-2850 Series" = http://192.168.178.47:80/WDP/SCAN, wsd
"EPSON WF-2850 Series" = http://192.168.178.47:443/eSCL
This works well, I will need to update my Linux-installation to get
Sane 1.0.29.
You have eSCL, this is very good.
You may use "old" (without WSD) sane-airscan, and binary packages
are
available from here:
https://github.com/alexpevzner/sane-airscan
It seems to me, that your scanner erroneously announces itself as
"http", but actually does "https". If automatic discovery doesn't
work,
add the following line to /etc/sane.d/airscan.conf:
[devices]
"EPSON WF-2850 Series" = https://192.168.178.47:443/eSCL
Please let me know, if my suspicions turn out to be true. And at
this
case, please send output of the following two commands, so I will be
able to think on workaround. The commands are:
avahi-browse -rt _uscan._tcp
avahi-browse -rt _uscans._tcp
(note the difference "_uscan" vs "_uscans").
--
Wishes, Alexander Pevzner ([email protected])
