Am 12.04.2020 um 15:08 schrieb Kelly Price: > This may not be a SANE problem but a networking problem.
Unfortunately not... > You have 192.168.10.0/24 for your PCs and 192.168.5.0/24 for the Pi. > I assume you have something a bit better than a commercial-grade home > router/firewall -- IE an actual firewall (Cisco/Juniper). I have a little Firewall built with a BananaPI and some iptables-scripts from mine. >From 192.168.10.0/24 to 192.168.5.0/24 is all permitted. All answers are permitted, too. > The simple solution is to put the Pi on the same address space as your I tried it. Same behaviour... I see in syslog of the Raspi the "access granted" and with tcpdump the broadcast packets, but my PC does NOT see the scanner on the Raspi... > PC. The harder solution is to fix your firewall's routing and > permissions to let the .10.x network talk fully with the .5.x > network... but that will get into why you (or your company) have it > set up like that. I really can't believe, that SANE need to have the devices all in the same net... With pixma (if I read the documentation) it should be possible, but I don't have a pixma... Any other idea? Thanks a lot Luca Bertoncello ([email protected])
