Hi, I'm trying to setup this scanner using sane-1.0.4-79 on SuSE 7.2 (Kernel 2.4.4) but ran into trouble. I'm using a standard scsi adaptor not the cripple part delivered with the scanner.
find-scanner: found scanner "Color FlatbedScanner17 0128" at device /dev/scanner find-scanner: found scanner "Color FlatbedScanner17 0128" at device /dev/sg0 I've set it up using yast1 as a snapscan. rhofmann@pc003:~ > cat /etc/sane.d/snapscan.conf scsi AGFA scsi COLOR scsi ACERPERI /dev/scanner But it isn't found by scanimage -L!? Used and loaded modules: ... ncr53c8xx 52368 0 (autoclean) sg 21920 0 ... rhofmann@pc003:~ > cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: Color Model: FlatbedScanner17 Rev: 0128 Type: Scanner ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 02 Lun: 00 Vendor: PIONEER Model: CD-ROM DR-U12X Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 03 Lun: 00 Vendor: YAMAHA Model: CRW2100S Rev: 1.0H Type: CD-ROM ANSI SCSI revision: 02 Cabelling und connection seems to be OK, since it runs with WIN98. I've tried vuescan for linux which works for normal but not for transparency scanning of color negatives. I would rather use xscanimage Any hints? Thanks Rainer
