On Saturday 02 February 2002 10:36 am, Oliver Schwartz wrote: It's all right:
snapscan.conf # a device name. # For USB devices, make sure that the name contains 'usb' somewhere, as in # '/dev/usbscanner' or '/dev/usb/scanner0'. Do not use a link # from /dev/scanner to your USB device. # For SCSI, use the generic device (e.g. /dev/sg0 in Linux). #/dev/sg0 /dev/usbscanner # Change to the fully qualified filename of your firmware file, if # firmware upload is needed by the scanner firmware /usr/local/bin/agfa/Snape20.bin Thanks > Hi, > > > I can scan using scanimage -d snapscan:/dev/usbscanner >test.pnm but > > xsane or kooke is not recognizing my scanner anymore, > > take a look at your snapscan.conf file (usually in /usr/local/etc/sane.d) > and make sure that /dev/usbscanner is listed as your scanner device name. > > Regards, > > Oliver > _______________________________________________ > Sane-devel mailing list > [email protected] > http://www.mostang.com/mailman/listinfo/sane-devel
