Hello I want to make a little 'Scanserver' with Sane based on fli4l, which is a Linux-Router-Project (www.fli4l.de, german). I've the Mustek Scanimage 4800P, which should be supported by mustek_pp. OK, so because fli4l is based on glibc5, i've compiled Sane 1.0.7 on a SuSE Linux 5.3 and copied all things needed by Sane to my Testpc.
Then I had configured Sane (*.conf) and want to start scanimage with # scanimage -d mustek_pp:/dev/lp0 then it returns: * scanimage: open of device mustek_pp:/dev/lp0 failed: Invalid argument Then I think that the lp0 has the false rights an I set the rights to 777 (with chmod) but then the same output cames from scanimage. I've made a link /dev/scanner which points to /dev/lp0. If I then run sane-find-scanner, it will hang and I've to kill it. The Ports-Settings in mustek_pp.conf should be right (0x378). The curios thing is that the scanner runs _once_ (at Thursday night), but since then it wouldn't run again. Then I connected the scanner to my 'big' System, which is based on SuSE Linux 7.2. I've compiled Sane with this system an then I tested it, but scanimage return the same error. Has anybody a tip for me? Or have I to use an older version of sane? Greets Michael
