On Dienstag, 30. Oktober 2001 21:12, Louco.com você na internet. wrote: [SNIP] > > Oct 27 17:26:35 loko kernel: pt_drv : driver version 0.39-8 > Oct 27 17:26:35 loko kernel: pt_drv : no device(s) detected, (-9020) > > The message with debug go in atathement. > > I've tryed epp and spp modes and the errors are the same. > > And tryed active and deactive IEEE1284 in kernel too. > > My paralel port is configured in bios in 0x378,irq7, my printer > (epson lx300) is perfect with this. Note: its unpluged. > > Whats going wrong? > > My box is an k6-3-400 with 128mb ram, mb fic 503a, with slack8 and kernel > 2.4.12-ac2. I tryed with kernel 2.2.19, 2.4.13 and 2.4.13-ac3 too. > > This scanner goes ok with the program primax_scan-0.93beta3 from > http://primax.sourceforge.net/ > primax_scan recognizes it like an "primax colorado" > > And it's the third(3) from this list: > http://primax.sourceforge.net/part_numbers.html > I've opened it and look for the ICs. [SNAP] The only thing that goes wrong is, that you're using the wrong driver. There are only a few Primax scanners which are in fact rebadged Plustek devices - see the man page (sane-plustek) for supported devices. If you're scanner works with the primax_scan-0.93beta3, so it is a 'real' Primax scanner and not a Plustek...
Gerhard
