Hi, On Tue, Nov 06, 2001 at 01:09:03PM +0100, Christoph Kukulies wrote: > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=055f ProdID=0007 Rev= 1.00 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 64mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=usbscanner > E: Ad=01(O) Atr=02(Bulk) MxPS= 2 Ivl= 0ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms > E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl= 1ms > > The latter worked the first time after I did a > modprobe scanner vendor=0x055f product=0x0007
Looks ok. So it's at least detected by the Linux kernel scanner module. > scanimage -L > device `mustek_usb:/dev/usb/scanner0' is a Mustek (unidentified) flatbed > scanner Did you change anything in mustek_usb.conf? The scanner shouldn't be detected at all by default. > And scanimage -L stderr with max debug level: > SANE_DEBUG_MUSTEK=255 You don't need this. It's only for SCSI scanners. > [mustek_usb] sane_init: config file line 6: trying to attach `usb 0x055f > 0x0007' > [sanei_usb] sanei_usb_find_devices: vendor=0x55f, product=0x7, > attach=0x402671d4 We are trying to autodetect the scanner ... > [sanei_usb] sanei_usb_open: open failed: No such file or directory now trying all possible device names (e.g. /dev/usb/scanner0) > [sanei_usb] sanei_usb_open: fd 5 opened We found something that can be opened... > [sanei_usb] sanei_usb_get_vendor_product: ioctl (vendor) of fd 5 failed: > Inappropriate ioctl for device > [sanei_usb] sanei_usb_get_vendor_product: ioctl (product) of ds 5 failed: > Inappropriate ioctl for device Ha, thanks for pointing to this typo :-) Will fix this in CVS. ^^ > [sanei_usb] sanei_usb_get_vendor_product: fd 5: couldn't get vendor+product > ids. ioctl unsupported? You seem to have a Linux kernel version < 2.4.8. Is this correct? This means you must set the scanner type manually (as described in the manual page). > [mustek_usb] sane_init: config file line 26: trying to attach > `/dev/usb/scanner0' > [mustek_usb] attach: start: devp != NULL, may_wait = 0 > [mustek_usb] attach: trying to open device `/dev/usb/scanner0' > [sanei_usb] sanei_usb_open: fd 5 opened > [mustek_usb] attach: device `/dev/usb/scanner0' successfully opened Ok, now manually ... > [mustek_usb] attach: warning: couldn't identify device `/dev/usb/scanner0', > must set type manually That's right... > [mustek_usb] sane_init: config file line 27: option 1200usb_plus is unknown Yes. There is no option named "1200usb_plus". All the options are listed in the manual page. Really all of them :-) However, if you like to hear your scanner in action, you can use "option 1200cu". You won't scan with this but maybe your scan slider moves at least. Please keep your fingers at the power plug and remove power if the slider bumps at the end of the scanner. Could you please check if the slider moves at all and if it moves to half of the page if you try to scan half the page? > [mustek] SANE mustek backend version 1.0 build 113 from sane-backends-1.0.6 Ignore this. > # + CPK 'invented' next two lines > /dev/usb/scanner0 > option 1200usb_plus Try: /dev/usb/scanner0 option 1200cu Bye, Henning
