Hi, I try to get a PRIMAX Jewle 4800 up t work but there seems to be a proble= m. Can anyone tell me what I can do to get it to work?
Thanks a lot=20 Michael tamboti:~ # sgcheck Assignment of generic SCSI devices, device host/channel/ID/LUN type(numeric type) vendor model: /dev/sg0 0/0/0/0 Direct-Access IBM DCAS-34330 /dev/sg1 0/0/1/0 Direct-Access IBM DPES-31080 /dev/sg2 0/0/3/0 Scanner Primax Jewel /dev/sg3 1/0/0/0 CD-ROM LG CD-ROM CRD-8320B /dev/sg4 1/0/1/0 CD-ROM HP CD-Writer+ 8200 tamboti:~ # tamboti:~ # sane-find-scanner # Note that sane-find-scanner will find any scanner that is connected # to a SCSI bus and some scanners that are connected to the Universal # Serial Bus (USB) depending on your OS. It will even find scanners # that are not supported at all by SANE. It won't find a scanner that # is connected to a parallel or proprietary port. sane-find-scanner: found SCSI scanner "Primax Jewel 1.01" at device=20 /dev/scanner sane-find-scanner: found SCSI scanner "Primax Jewel 1.01" at device /dev/= sg2 tamboti:~ # scanimage -d teco1:/dev/scanner scanimage: open of device teco1:/dev/scanner failed: Invalid argument tamboti:~ # scanimage --list-devices No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). tamboti:~#
