On Mon, 21 Oct 2002 14:27:40 -0400 (EDT), Maximo Lachman wrote: >If I run: >find-scanner [devicename] >it works when b0t2l0 is used for [devicename] and reports: >found processor "EPSON Perfection1640 1.03" at device b0t2l0
Seems you are running sane on OS/2 Which version of sane do you use? >However if I run >scanimage -h -d [devicename] >it does not work. This probably means you don't have the related epson.conf at the right place. place the following 2 lines into a file called epson.conf --- cut --- scsi EPSON b0t2l0 --- cut --- You probably won't need the second line at least if you are running a newer version of sane, but if it's an older version I'm not shure. Then either place this epson.conf file into the same directory as scanimage.exe or better: create a directory named x:\HOME\.sane (replace x with your real drive-letter) and place the epson.conf into this directory and add SET SANE_CONFIG_DIR=x:\HOME\.sane to your config.sys and reboot. Your setup is correct if scanimage -L lists your scanner Regards Franz
