moreover, when i send the firmware to the device, i see the scanner's light flashing and the scan light mechanism moves back and forth a couple of times.
/home/jimka/agfafirm /dev/usb/scanner0 /home/jimka/Snape40.bin thus, i know the scanner is plugged-in etc... -jim Jim Newton wrote: > > hi, i've installed all the lastest sane rpms under redhat 7.2. > when i run sane-find-scanner i get promising results. > but scanimage cannot find any SANE devices. Any ideas of what > might be wrong, or what i can try, or how i can get more debugging > information? > > -jim > > [jimka@localhost sane-backends-1.0.7]$ which scanimage > /usr/bin/scanimage > [jimka@localhost sane-backends-1.0.7]$ which sane-find-scanner > /usr/bin/sane-find-scanner > [jimka@localhost sane-backends-1.0.7]$ scanimage > scanimage: no SANE devices found > [jimka@localhost sane-backends-1.0.7]$ sane-find-scanner > # Note that sane-find-scanner will find any scanner that is connected > # to a SCSI bus and some scanners that are connected to the Universal > # Serial Bus (USB) depending on your OS. It will even find scanners > # that are not supported at all by SANE. It won't find a scanner that > # is connected to a parallel or proprietary port. > > # You may want to run this program as super-user to find all devices. > # Once you found the scanner devices, be sure to adjust access > # permissions as necessary. > > sane-find-scanner: found USB scanner (vendor = 0x06bd, product = 0x208d) > at device /dev/usb/scanner0 > sane-find-scanner: found USB scanner (vendor = 0x06bd, product = 0x208d) > at device /dev/usbscanner > [jimka@localhost sane-backends-1.0.7]$
