--mYCpIKhGyMATD0i+ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable
Your /proc/bus/usb/devices output is incomplete: You've left out a few lines that show which driver did recognize your scanner. You need the first "I:" line after the "S:" lines describing your device. Can you please provide this information. One thing you definitely have to change is the permissions on=20 the device file: chmod 666 /dev/usb/scanner0 Karl Heinz On Sun, May 26, 2002 at 09:09:45PM -0500, Joel Uckelman wrote: > I upgraded to RedHat 7.3 yesterday, which apparently has caused my Epson= =20 > 610 to stop working. Now, sane-find-scanner detects it: >=20 > sane-find-scanner: found USB scanner (vendor =3D 0x04b8, product =3D 0x01= 03) at=20 > device /dev/usb/scanner0 >=20 > And it shows up in /proc/bus/usb/devices: >=20 > C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA > I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver= =3Dhub > E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 8 Ivl=3D255ms > T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D01 Cnt=3D01 Dev#=3D 2 Spd=3D12 M= xCh=3D 0 > D: Ver=3D 1.00 Cls=3Dff(vend.) Sub=3D00 Prot=3Dff MxPS=3D 8 #Cfgs=3D 1 > P: Vendor=3D04b8 ProdID=3D0103 Rev=3D 0.01 > S: Manufacturer=3DEPSON > S: Product=3DPerfection610 =20 >=20 > Along with the driver in /proc/bus/usb/drivers: >=20 > usbdevfs > hub > 48- 63: usbscanner >=20 > lsmod shows that I have, among others, the usb-uhci, usbcore, and scanner= =20 > modules loaded. >=20 > /etc/sane.d/dll.conf has everything but 'epson' commented out,=20 > /etc/sane.d/epson.conf has only 'usb /dev/usb/scanner0' in it, and the=20 > device has what I think are the proper permissions: >=20 > crw-r--r-- 1 root root 180, 48 Apr 11 09:25 /dev/usb/scanner0 >=20 > But when I try 'scanimage -L' it says that 'No scanners were identified.'= =20 > What's the problem here? >=20 > Thanks! >=20 > --=20 > J. >=20 >=20 > _______________________________________________ > Sane-devel mailing list > [email protected] > http://www.mostang.com/mailman/listinfo/sane-devel --=20 Karl Heinz Kremer [email protected] PGP Key at http://www.khk.net/download/khk.asc EPSON Sane Backend: http://www.khk.net --mYCpIKhGyMATD0i+ Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE88iujxejv3RfKrhsRAqbCAJ4iCv5Rjh3oPp6FalnvVv6pAluXiwCgnSrk Vf/gqzBw1Ygtpzl2Ij/tFk0= =ELO9 -----END PGP SIGNATURE----- --mYCpIKhGyMATD0i+--
