Hi, > > [snapscan] add_device: Is vendor "LITE-ON" model "LTR-12101B" a supported > > scanner? > > [snapscan] add_device: "LITE-ON LTR-12101B" is not one of AGFA SnapScan > > 300, 310, 600, 1212, 1236, e20, e25, e26, e40, e42, e50, e52 or e60 > > Acer 300, 310, 610, 610+, 620, 620+, 640, 1240, 3300, 4300 or 5300 > > Guillemot MaxiScan A4 Deluxe > > [snapscan] sane_snapscan_get_devices (0xbffff2e8, 0) > > Looks like you try to scan from the CD (/dev/sg0) :-) > > > Removed the CD Burner and now get. > > Did you reboot? Then your scanner will be /dev/sg0 after the reboot.
You said that your CD Burner is ATAPI - I can only guess, but probably you have ATAPI-SCSI emulation enabled in the kernel. This will shift the SCSI devices once the CD Burner is detected. > The snapscan backend only looks for the device mentioned in > snapscan.conf. I don't know if this is supported by this backend but > you could try to add both devices to snapscan.conf. Or use something > like "scsi AGFA" in snapscan.conf. Both solutions should work for the snapscan backend, but adding "SCSI AGFA" is probably the safer way. Unfortunately I deleted it as default setting in the recent backend releases. Regards, Oliver
