Hi! I've just installed SANE-1.0.7 on my Slackware 8-based Linux system with these mods:
* 2.4.18 kernel * glibc-2.2.5 * gcc-3.0.4 * binutils-2.12 I DO have USB support compiled into my kernel and the USB ports and scanner driver ARE being loaded (/var/log/messages output): Mar 25 08:50:39 c71414-a kernel: usb.c: registered new driver usbdevfs Mar 25 08:50:39 c71414-a kernel: usb.c: registered new driver hub Mar 25 08:50:39 c71414-a kernel: uhci.c: USB Universal Host Controller Interface driver v1.1 Mar 25 08:50:39 c71414-a kernel: uhci.c: USB UHCI at I/O 0xe000, IRQ 11 Mar 25 08:50:39 c71414-a kernel: usb.c: new USB bus registered, assigned bus number 1 Mar 25 08:50:39 c71414-a kernel: Product: USB UHCI-alt Root Hub Mar 25 08:50:39 c71414-a kernel: hub.c: USB hub found Mar 25 08:50:39 c71414-a kernel: usb.c: registered new driver usbscanner Mar 25 08:50:39 c71414-a kernel: scanner.c: 0.4.6:USB Scanner Driver Mar 25 08:50:39 c71414-a kernel: hub.c: USB new device connect on bus1/2, assigned device number 2 /proc/bus/usb/devices output: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI-alt Root Hub S: SerialNumber=e000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=03f0 ProdID=0105 Rev= 1.00 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=usbscanner E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl= 1ms sane-find-scanner can 'see' the scanner: sane-find-scanner: found USB scanner (vendor = 0x03f0, product = 0x0105) at device /dev/usb/scanner0 but scanimage can't seem to find the scanner: No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). here is my /usr/etc/sane.d/hp.conf file: bash-2.05a# cat /usr/etc/sane.d/hp.conf #scsi HP usb 0x03f0 0x0105 /dev/usb/scanner0 option connect-device bash-2.05a# Any ideas as to why my scanner can't be found by scanimage? I HAVE applied the HP 4200c patch to the 1.0.7 source, even though the HP4200c patch listed 1.0.5 in the filename, so I don't know if I even needed to apply the patch. Thanks in advance for your time. Peace.... Tom
