Anyone encountered something like this? (during a "preview") Ive had problems scanning...and some rather loud noises coming from the device,..yet in windows no sounds come from the scanner during a scan, so it cant be a hardware fault.
Scanner: Mustek 1200UB (USB) Kernel Detected etc... Sane: 1.0.7 Xsane: 0.86 Mustek Sane Backend: 1.0-14 (tried normal sane-backend too) http://mdew.orcon.net.nz/debug-log.tar.gz [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x62 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x62 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x62 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x62 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x62 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x62 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x60 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x60 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x60 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x60 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x60 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x60 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x60 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x60 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x62 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x62 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x62 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x62 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x62 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x62 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x62 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x62 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x62 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x62 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x60 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x60 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x60 [mustek_usb] usb_low_get_home_sensor: exit [mustek_usb] usb_low_get_home_sensor: start [mustek_usb] usb_low_read_reg: Reg: 0x1f, Value: 0x60 [mustek_usb] usb_low_get_home_sensor: exit (had to ctrl-C...) modprobe scanner vendor=0x55f product=0x6 chmod 666 /dev/usb/scanner0 [11:26am 26-Apr-02]$ lsmod Module Size Used by Tainted: P agpgart 15520 3 (autoclean) NVdriver 945504 10 (autoclean) scanner 8416 0 ymfpci 40544 2 ac97_codec 9600 0 [ymfpci] soundcore 3492 2 [ymfpci] ntfs 50112 1 (autoclean) uhci 23752 0 (unused) mousedev 3808 1 hid 12864 0 (unused) ide-cd 26848 0 loop 7888 0 (unused) sg 24068 0 sr_mod 12824 0 ide-scsi 7488 0 cdrom 28672 0 [ide-cd sr_mod] scsi_mod 51468 3 [sg sr_mod ide-scsi] 8139too 13504 1 Ive got a usb-mouse on the other port, with no problems... pty: 256 Unix98 ptys configured Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA PDC20262: IDE controller on PCI bus 00 dev 70 PCI: Found IRQ 9 for device 00:0e.0 PDC20262: chipset revision 1 PDC20262: not 100% native mode: will probe irqs later PDC20262: ROM enabled at 0xe7000000 PDC20262: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. ide2: BM-DMA at 0xc000-0xc007, BIOS settings: hde:DMA, hdf:pio ide3: BM-DMA at 0xc008-0xc00f, BIOS settings: hdg:DMA, hdh:pio hda: ASUS CRW-2410A, ATAPI CD/DVD-ROM drive hdb: ASUS DVD-ROM E608, ATAPI CD/DVD-ROM drive hde: ST330630A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide2 at 0xb000-0xb007,0xb402 on irq 9 blk: queue c032693c, I/O limit 4095Mb (mask 0xffffffff) hde: 59777640 sectors (30606 MB) w/2048KiB Cache, CHS=59303/16/63, UDMA(66) Partition check: hde: [PTBL] [3720/255/63] hde1 hde2 hde3 hde4 < hde5 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Linux video capture interface: v1.00 usb.c: registered new driver usbdevfs usb.c: registered new driver hub NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. XFS mounting filesystem ide2(33,2) VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 228k freed Adding Swap: 305192k swap-space (priority -1) 8139too Fast Ethernet driver 0.9.24 PCI: Found IRQ 10 for device 00:0b.0 eth0: RealTek RTL8139 Fast Ethernet at 0xd8834000, 00:30:4f:0b:43:a8, IRQ 10 eth0: Identified 8139 chip type 'RTL-8139C' SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: ASUS Model: CRW-2410A Rev: 1.0 Type: CD-ROM ANSI SCSI revision: 02 Vendor: ASUS Model: DVD-ROM E608 Rev: 1.30 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray loop: loaded (max 8 devices) usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[email protected]> hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice uhci.c: USB Universal Host Controller Interface driver v1.1 uhci.c: USB UHCI at I/O 0xa000, IRQ 10 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected i2c-algo-bit.o: i2c bit algorithm module bttv: driver version 0.7.91 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Host bridge is Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge bttv: Host bridge needs ETBF enabled. hub.c: USB new device connect on bus1/1, assigned device number 2 usb.c: USB device 2 (vend/prod 0x55f/0x6) is not claimed by any active driver. NTFS driver v1.1.22 [Flags: R/W MODULE] hub.c: USB new device connect on bus1/2, assigned device number 3 hub.c: USB hub found hub.c: 4 ports detected eth0: Setting half-duplex based on auto-negotiated partner ability 0000. hub.c: USB new device connect on bus1/2/1, assigned device number 4 input0,hiddev0: USB HID v1.00 Mouse [A4Tech USB Optical Mouse] on usb1:4.0 hdb: CHECK for good STATUS hda: CHECK for good STATUS PCI: Found IRQ 5 for device 00:09.0 ymfpci: YMF744 at 0xe8020000 IRQ 5 ac97_codec: AC97 Audio codec, id: 0x8384:0x7608 (SigmaTel STAC9708) usb.c: registered new driver usbscanner scanner.c: probe_scanner: User specified USB scanner -- Vendor:Product - 55f:6 scanner.c: 0.4.6:USB Scanner Driver [02:10pm 26-Apr-02]$ cat /proc/bus/usb/devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc=115/900 us (13%), #Int= 3, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=a000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=09da ProdID=0006 Rev= 1.00 S: Manufacturer=A4Tech S: Product=USB Optical Mouse C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 4 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0e01 Rev= 0.04 S: Product=USB HUB C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=055f ProdID=0006 Rev= 1.00 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=496mA I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=usbscanner E: Ad=01(O) Atr=02(Bulk) MxPS= 2 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=1ms [02:10pm 26-Apr-02]$ cat /proc/bus/usb/drivers usbdevfs hub hid 48- 63: usbscanner usb_mouse -- ph33r! Linux mdew 2.4.19-pre7-xfs-aa #4 Fri Apr 26 12:14:19 NZST 2002 i686 unknown GPG Key: http://mdew.orcon.net.nz/gpg
