Hi, here's a errorlog from a guy trying to use a HP-Scanner with current SANE-version:
Scanner is HP 4C Adapter is Adaptec 2940U/UW Sane-Version is 1.0.9 Content of hp.conf is: ---cut--- b1t5l0 ---cut--- scanimage -d hp:b1t5l0 1>test.pnm 2>errors.255 fails on OS/2 with the following errorlog: [sanei_debug] Setting debug level of hp to 255. [hp] sane_init called [hp] sane_init will finish with Success [hp] sane_open called [hp] hp_read_config: hp backend v0.96 starts reading config file [hp] hp_read_config: processing line <b1t5l0> [hp] hp_read_config: attach b1t5l0 [hp] hp_get_dev: New device b1t5l0, connect-scsi, scsi-request=1 [hp] sanei_hp_device_new: b1t5l0 [sanei_debug] Setting debug level of sanei_scsi to 255. ... [sanei_scsi] OS/2: adapter#01 '2940U/UW/A/T/D' [sanei_scsi] OS/2: id#00 status=82h [sanei_scsi] OS/2: id#01 status=82h [sanei_scsi] OS/2: id#02 status=01h [sanei_scsi] OS/2: type is 'CD-drive' [sanei_scsi] OS/2 'PIONEER DVD-ROM DVD-303R2.00 1999/12/16PIONEER ' [sanei_scsi] OS/2: id#03 status=82h [sanei_scsi] OS/2: id#04 status=82h [sanei_scsi] OS/2: id#05 status=01h [sanei_scsi] OS/2: type is 'processor' [sanei_scsi] OS/2 'HP C1130A 3540 1999/12/16PIONEER ' [sanei_scsi] OS/2: id#06 status=01h [sanei_scsi] OS/2: type is 'CD-drive' [sanei_scsi] OS/2 'YAMAHA CRW4260 1.0q30/10/98/16PIONEER ' [sanei_scsi] open_aspi: close temporary file 'asa00309' [hp] scsi_inquire: sending INQUIRE [sanei_scsi] sanei_scsi_cmd: Reading srb.u.cmd.data_len= 36 [hp] scsi_new: sending TEST_UNIT_READY [sanei_scsi] sanei_scsi_cmd: Writing srb.u.cmd.data_len= 0 [hp] scsi_flush: writing 2 bytes: [hp] 0x0000 1B 45 .E ... [hp] probing ScanJet IIcx [hp] scsi_flush: writing 6 bytes: [hp] 0x0000 1B 2A 73 31 31 45 .*s11E [sanei_scsi] sanei_scsi_cmd: Writing srb.u.cmd.data_len= 6 [sanei_scsi] sanei_scsi_cmd: Reading srb.u.cmd.data_len= 24 [hp] scsi_read: 24 bytes: [hp] 0x0000 1B 2A 73 31 31 64 4E 00 31 39 35 41 18 00 00 00 .*s11dN.195A.... [hp] 0x0010 43 31 31 33 30 41 20 20 C1130A [hp] scl_inq: parameter 11 unsupported [hp] probing ScanJet 3c/4c/6100C [hp] scsi_flush: writing 6 bytes: [hp] 0x0000 1B 2A 73 31 32 45 .*s12E [sanei_scsi] sanei_scsi_cmd: Writing srb.u.cmd.data_len= 6 [sanei_scsi] sanei_scsi_cmd: Reading srb.u.cmd.data_len= 24 [hp] scsi_read: 24 bytes: [hp] 0x0000 1B 2A 73 31 32 64 4E 00 31 39 35 41 18 00 00 00 .*s12dN.195A.... [hp] 0x0010 43 31 31 33 30 41 20 20 C1130A [hp] scl_inq: parameter 12 unsupported [hp] probing ScanJet 3p ... [hp] probe_scanner: Probing b1t5l0 [hp] probe_scanner: use cached compatibility flags [hp] start: No request to mirror image vertically [hp] sanei_hp_optset_scan_type: scantype=0 [hp] start: No request to mirror image vertically [hp] start: 2550 pixels per line, 319 bytes per line, 4199 lines high [hp] sanei_hp_scl_startScan: Start scan [hp] scsi_flush: writing 5 bytes: [hp] 0x0000 1B 2A 66 30 53 .*f0S [sanei_scsi] sanei_scsi_cmd: Writing srb.u.cmd.data_len= 5 [hp] sanei_hp_get_connect: Could not get info for b1t5l0. Assume SCSI Assertion failed: info, file hp-scl.c, line 1317 Abnormal program termination ... Any hint what to do? Complete errorlog available on request. Regards, Franz
