Hi Bill, I think you have a usb scanner. If so look back about one day on this list to a message from me with the title Scanner Basics. It explains how I got my USB scanner working.
On Mon, 18 Nov 2002, William Heidrich wrote: > Still having trouble. Thanks if the following means anything to you. > > > 0) the scanner works fine under windows 98 & XP > 1) I have compiled the scanner driver as a module. (using RH 8.0) > 2) without modprobe it is detected as libusb:001:004 > 3) after modprobe it is identified as /dev/usb/scanner0 > > Sane-find-scanner detects these and scanimage -L detects and names the > scanner correctly > > When I try scanimage >image.pnm the console hangs. The trace shows write > errors to the scanner > > I tried with debug option and I have attached the log I received: (I get > a similar log when I have libusb:001:004 listed in the canon630u.conf > file > > *** > > **** > > > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Henning > Meier-Geinitz > Sent: Saturday, 16 November 2002 9:49 PM > To: SANE Mailing List > Subject: Re: [sane-devel] New to list - need help to understand sane > > > > [root@localhost root]# sane-find-scanner > > found USB scanner (vendor=0x04a9, product=0x2204 [CanoScan FB630U]) at > > > libusb:001:004 > > Ok, found by libusb. > > > [root@localhost root]# SANE_DEBUG_CANON630U=255 scanimage -L > > [sanei_debug] Setting debug level of canon630u to 255. [canon630u] > > sane_init: version_code != 0, authorize != 0 [canon630u] sane_init: > > SANE Canon630u backend version 1.0.1 from sane-backends-1.0.9 > > 1.0.9 > > [canon630u] reading configure file canon630u.conf > > [canon630u] attach_matching_devices(usb 0x04a9 0x2204) > > Your first line in canon630u.conf is > > usb 0x04a9 0x2204 > > That's ok. It will find your scanner. > > > [canon630u] attach_scanner: libusb:001:004 > > [canon630u] attach_scanner: opening libusb:001:004 [canon630u] > > CANON_open_device: `libusb:001:004' [canon630u] CANON_close_device: > > [canon630u] finished reading configure file [canon630u] > > sane_get_devices(local_only = 0) device `canon630u:libusb:001:004' is > > a CANON Canoscan FB630U flatbed scanner > > Ok, your scanner is found. Now does scanning work? > > scanimage >image.pnm > > > > Bye, > Henning > > _______________________________________________ > Sane-devel mailing list > [email protected] > http://www.mostang.com/mailman/listinfo/sane-devel > -- - Karl Larsen k5di Las Cruces,NM Az ScQRPions -
