Hi, what about running the stuff as root? Check the access rights!
Gerhard On Donnerstag, 21. November 2002 15:27, Ryan Budge wrote: > Hi all. > > Well im fighting it out still. > > 1.=09I recompiled my kernel and took out the uscanner driver. > > 2.=09On boot I get the scanner found by ugen0 > > > 3.=09Changed plustek.conf to contain : > [usb] 0x04a9 0x2206 > device libusb:001:002 > > 4.=09usbdevs -v gives : > Controller /dev/usb0: > addr 1: self powered, config 1, OHCI root hub(0x0000), OPTi(0x0000), re= v > 1.00 > port 1 addr 2: power 500 mA, config 1, CANOSCAN N656U(0x2206), > Canon(0x04a9), rev 1.00 > port 2 powered > > 5.=09scanimage -L gives : > > [sanei_debug] Setting debug level of plustek to 255. > [plustek] Plustek backend V0.44-10, part of sane-backends 1.0.9 > [plustek] >#[usb] 0x04A9 0x2206< > [plustek] >#device /dev/uscanner0< > [plustek] >#[usb] 0x04A9 0x2206< > [plustek] >[usb] 0x04a9 0x2206< > [plustek] next device is a USB device (0x04A9-0x2206) > [plustek] next device is an USB device > [plustek] >device libusb:001:002< > [plustek] Decoding device name >libusb:001:002< > [plustek] >< > [plustek] attach (libusb:001:002, 0xbfbfee38, 0x0) > [plustek] Device configuration: > [plustek] device name : >libusb:001:002< > [plustek] porttype : 1 > [plustek] USB-ID : >0x04A9-0x2206< > [plustek] warmup : -1s > [plustek] lampOff : -1 > [plustek] lampOffOnEnd : -1 > [plustek] skipCalibr. : 0 > [plustek] invertNegs. : 0 > [plustek] pos_x : 0 > [plustek] pos_y : 0 > [plustek] pos_shading_y: -1 > [plustek] neg_x : 0 > [plustek] neg_y : 0 > [plustek] neg_shading_y: -1 > [plustek] tpa_x : 0 > [plustek] tpa_y : 0 > [plustek] tpa_shading_y: -1 > [plustek] red gain : -1 > [plustek] green gain : -1 > [plustek] blue gain : -1 > [plustek] red Gamma : 1.00 > [plustek] green Gamma : 1.00 > [plustek] blue Gamma : 1.00 > [plustek] gray Gamma : 1.00 > [plustek] --------------------- > [plustek] drvopen() > [plustek] usbDev_open(libusb:001:002,0x04A9-0x2206) > [plustek] open failed: -1 > [plustek] sane_get_devices (0xbfbff744, 0) > > No scanners were identified. If you were expecting something different, > check that the scanner is plugged in, turned on and detected by the > sane-find-scanner tool (if appropriate). Please read the documentation > which came with this software (README, FAQ, manpages). > [plustek] sane_exit > > > Anyone have any more ideas ? > > Thanks for the help. > > Regards, > Ryan Budge > e-mail : [email protected] > Mobile : +27 83 415 7926 > Fax : +27 8 83 415 7926
