Hi, this all looks okay, the problem is either your dll.conf and/or the plustek.conf file... At least you need the entry plustek in the dll.conf and in the plustek.conf: [usb] 0x004a9 0x2206 device auto Check the examples in the file, that has been delivered with the TEST3 tar-ball. Itmight happen, that the older ones are not overwritten during the installation step... This should do the trick! Gerhard
On Saturday, 30. November 2002 00:14, adam wrote: > after installing latest sane-backends, along with the 45test3 patch > > > i am still receiving this message - > > [root@alakard rpms]# sane-find-scanner > > # No SCSI scanners found. If you expected something different, make > sure that > # you have loaded a SCSI driver for your SCSI adapter. > > found USB scanner (vendor=0x04a9 [Canon], product=0x2206 [CanoScan]) at > libusb:001:002 > # A USB device was detected. This program can't be sure if it's really > # a scanner. If it is your scanner, it may or may not be supported by > # SANE. Try scanimage -L and read the backend's manpage. > > # Scanners connected to the parallel port or other proprietary ports > can't be > # detected by this program. > > its like it guess it sees it, but it isnt really sure :O > > -adam >
