Hi, as you're using the 0.40version with SANE-backends 1.0.9, I expect a version conflict! Use the latest module 0.42. Simply unpack this one, recompile, reinstall and reload it, then the old = one will be removed automatically...
Gerhard On Donnerstag, 15. Mai 2003 23:39, Ernie Schroder wrote: > On Thursday 15 May 2003 05:21 pm, a tiny voice compelled you to write: > > Hi, > > > > I'm sending this back to the sane-devel list as I personally don't > > have much experience with the plustek backend. Still trying to > > answer... > > > > On Thu, May 15, 2003 at 04:47:31PM -0400, Ernie Schroder wrote: > > > # SANE_DEBUG_PLUSTEK=3D255 scanimage -L > > > [sanei_debug] Setting debug level of plustek to 255. > > > [plustek] Plustek backend V0.44-10, part of sane-backends 1.0.9 > > > [plustek] ># Plustek-SANE Backend configuration file< > > > [plustek] ># For use with Plustek parallel-port scanners and< > > > [plustek] ># LM9831/2/3 based USB scanners< > > > [plustek] >< > > > [plustek] ># For parport devices use the parport section< > > > [plustek] >#< > > > [plustek] >[parport]< > > > [plustek] next device is a PARPORT device > > > [plustek] >device /dev/pt_drv< > > > [plustek] Decoding device name >/dev/pt_drv< > > > [plustek] >< > > > [plustek] >#< > > > [plustek] ># leave the default values as specified in > > > /etc/modules.conf< [plustek] >#< > > > [plustek] >#option warmup=3D30< > > > [plustek] >#option lOffOnEnd=3D0< > > > [plustek] >#option lampOff=3D0< > > > [plustek] >#option port=3D0x378< > > > [plustek] >< > > > > > > > The device node for the pt_drv in /dev does exist and the user > > > > has access permissions for it? > > > > > > there is a /dev/scanner/pt_drv.(no /dev/pt_drv) Permissions are ok: > > > ls -l /dev/scanner/pt_drv0 > > > crwxrwxrw- 1 root wheel 40, 0 Dec 31 1969 > > > /dev/scanner/pt_drv0 > > > > The path is wrong. It's /dev/pt_drv. Or change plustek.conf to > > /dev/scanner/pt_drv. > > > > > and as root I do: > > > scanimage --device-name plustek:/dev/scanner/pt_drv0 > > > scanimage: open of device plustek:/dev/scanner/pt_drv failed: Error > > > during device I/O > > > > > > should I sym-link /dev/scanner/pt_drv0 to /dev/pt_drv? > > > > Yes, that's another way to do it. > > I tried the sym-link, no help > > How do I remove the plustek-module-0_40_17 so I can built plustek > module: 0_42_9?
