On Monday 19 May 2003 13:18, Gene Heskett wrote: >Humm, the missus just came in and said can you scan this? The > last time I used the scanner it was working great, but now the > icon that launches xsane goes thru the root warning and then > scans for devices forever, or until I call ksysguard and kill it. > >sane-find-scanner shows this: >--------------------------- >[root@coyote root]# sane-find-scanner > > # No SCSI scanners found. If you expected something different, >make sure that > # you have loaded a SCSI driver for your SCSI adapter. > >found USB scanner (vendor=0x04b8, product=0x010f) at >/dev/usb/scanner0 >found USB scanner (vendor=0x1453, product=0x4026) at > libusb:002:005 ^^^^^^^^^^^^^not a scanner, but a usb-serial > adaptor^^^^^^^^^^^^^ found USB scanner (vendor=0x04b8 [EPSON], > product=0x010f [EPSON Scanner 010F]) at libusb:002:003 > # Your USB scanner was (probably) detected. It may or may not be >supported by > # SANE. Try scanimage -L and read the backend's manpage. > > # Scanners connected to the parallel port or other proprietary >ports can't be > # detected by this program. >------------------------- > >scanimage -L hangs forever also, but can be ctrl-c'd. >Next, I reconfiguring and reinstalling all 3 pieces, which if that >doesn't fix, I'll be back. >xsane is .90, sane-backends is 1.0.11, sane-frontends is 1.0.10, > and it all worked great before I installed kde-3.1.1a and or that > usb-serial adaptor, a prologic that works just fine also. Update, it turned out it was hanging on the epson backend (from iscan-1.5.0) so I disabled that in dll.conf and its working.
Then the print plugin for the gimp seems to have gone awol. Gimp says it crashed. So I'm damned if I do, and damned if I don't it seems. -- Cheers, Gene AMD K6-III@500mhz 320M Athlon1600XP@1400mhz 512M 99.26% setiathome rank, not too shabby for a WV hillbilly Yahoo.com attornies please note, additions to this message by Gene Heskett are: Copyright 2003 by Maurice Eugene Heskett, all rights reserved.
