Hi, what about the access rights of /dev/pt_drv0?
Please check this.. Gerhard On Dienstag, 4. März 2003 13:36, Danilo Godec wrote: > I have a Primax 4800 Direct scanner, which is a re-labelled Plustek > parallel port scanner. I have Suse 8.1 which comes with sane 1.0.8 and > includes Plustek support. > > I've also downloaded the Plustek kernel driver from > plustek-module-0_42_9.tar.gz as it is supposed to work with sane 1.08 > without re-compiling sane. > > The driver seems to detect the scanner: > > pt_drv : driver version 0.42-10 > parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] > pt_drv0: Primax 4800 Direct found on port 0x0378 > pt_drv0: Lamp-Timer set to 180 seconds. > pt_drv0: WarmUp period set to 15 seconds. > pt_drv0: Lamp untouched on driver unload. > > However: > > dis:~ # scanimage -L > > No scanners were identified. If you were expecting something different, > check that the scanner is plugged in, turned on and detected by the > sane-find-scanner tool (if appropriate). Please read the documentation > which came with this software (README, FAQ, manpages). > > dis:~ # scanimage -d plustek:/dev/pt_drv0 > scanimage: open of device plustek:/dev/pt_drv0 failed: Error during device > I/O > > I have uncommented the 'plustek' line in /etc/sane.d/dll.conf. What else > must I do to get the scanner to work? > > Thanks, D. > > _______________________________________________ > Sane-devel mailing list > [email protected] > http://www.mostang.com/mailman/listinfo/sane-devel
