i am sending this again, cause my list membership was wrong, sorry if it double posts...
-------------------------------------------------------- just got a Fujitsu fi-4120C scanner. was previously using an M3091DCd. i am running latest cvs snapshot. i use the scsi port, not usb. i get the following error: [fujitsu] Window set [fujitsu] 000: 00 00 01 2c 01 2c 00 00 00 00 00 00 00 00 00 00 [fujitsu] 016: 25 00 00 00 24 e8 00 80 00 00 01 00 00 00 00 00 [fujitsu] 032: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0 [fujitsu] 048: 20 00 00 00 00 84 00 00 00 00 00 00 00 00 00 00 [fujitsu] <cmd< [fujitsu] 000: 24 00 00 00 00 00 00 00 48 00 00 00 00 00 00 00 [fujitsu] 016: 00 40 00 00 01 2c 01 2c 00 00 00 00 00 00 00 00 [fujitsu] 032: 00 00 25 00 00 00 24 e8 00 80 00 00 01 00 00 00 [fujitsu] 048: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [fujitsu] 064: 00 a0 20 00 00 00 00 84 00 00 00 00 00 00 00 00 [fujitsu] 080: 00 00 [fujitsu] 5/38/0: Invalid field in parm list [fujitsu] offending byte is 49. (Byte 41 in window descriptor block) [fujitsu] sanei_scsi_cmd: returning 0x00000004 [fujitsu] sanei_scsi_cmd: returning 0 bytes: [fujitsu] sane_start: ERROR: failed to set window from the command line: SANE_DEBUG_FUJITSU=128 SANE_DEBUG_SANEI_SCSI=0 scanadf -d fujitsu --mode Lineart -x 200 -y 200 byte 41 (0x29) is gamma/pattern according to fujitsu-scsi.h i have tried hard-setting this to all the possible (and some un-listed) options, no change. i have tried different modes, no change. what is this option for (is is gamma correct or a pattern?) and what should it be for lineart? how easy is it to get programming docs from fujitsu, since the 4120 seems to need some help? allan -- "so don't tell us it can't be done, putting down what you don't know. money isn't our god, integrity will free our souls" - Max Cavalera
