Hi all I hoping someone has seen a similar problem and found a solution for it. I have seen some posting on the subject, but could not find any answers that would work for me...
I have a RedHat 8.0, sane 1.0.8 (tried with 1.0.9 - same result) and Canon630u. The system recognizes my scanner, but scanimage -d canon630u:/dev/usb/scanner0 results in Device busy error. At certain point it actually worked! I used xsane and was able to scan an image. After reboot I could not get it to work anymore... Here is some more info: /etc/sane.d/canon630u: # Options for the canonusb backend # Autodetect the Canon CanoScan FB630u #usb 0x04a9 0x2204 /dev/usb/scanner0 # device list for non-linux-systems (enable if autodetect fails): #/dev/scanner #/dev/usb/scanner0 /etc/modules.conf: alias char-major-81 scanner options scanner vendor=0x4a9 product=0x2204 sane-find-scanner: # Note that sane-find-scanner will find any scanner that is connected # to a SCSI bus and some scanners that are connected to the Universal # Serial Bus (USB) depending on your OS. It will even find scanners # that are not supported at all by SANE. It won't find a scanner that # is connected to a parallel or proprietary port. sane-find-scanner: found USB scanner (vendor = 0x04a9, product = 0x2204) at device /dev/usb/scanner0 sane-find-scanner: found USB scanner (vendor = 0x04a9, product = 0x2204) at device /dev/usbscanner0 scanimage -L: device `canon630u:/dev/usb/scanner0' is a CANON Canoscan FB630U flatbed scanner scanimage -d canon630u:/dev/usb/scanner0 scanimage: sane_start: Device busy Any help would be greatly appreciated. Thanks, Greg. -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Olaf Meeuwissen Sent: Tuesday, January 14, 2003 8:21 PM To: Henning Meier-Geinitz Cc: SANE Mailing List Subject: Re: [sane-devel] Feature freeze for SANE 1.0.10 Henning Meier-Geinitz <[email protected]> writes: > Does it make sense to add a .desc file in the external section? So > the epson kowa backend would show up on the SANE webpage as external > backend. I guess it would. While we are at it, I guess you could also add "Image Scan! for Linux" to the frontends page. > If yes, could you (or someone else) provide a epson-kw.desc (or > whatever name)? Could you send me a sample? I'll see what I can do. -- Olaf Meeuwissen EPSON KOWA Corporation, ECS GnuPG key: 6BE37D90/AB6B 0D1F 99E7 1BF5 EB97 976A 16C7 F27D 6BE3 7D90 Penguin's lib! -- I hack, therefore I am -- LPIC-2 _______________________________________________ Sane-devel mailing list [email protected] http://www.mostang.com/mailman/listinfo/sane-devel
