Till Kamppeter wrote: > Edit /etc/modules.conf adding the line > > options scanner vendor=0x06dc product=0x0014 > > Then do (as root): > > rmmod scanner > modprobe scanner > > You wiil find the device then as /dev/usb/scanner0 (NOT in /etc/usb). > > Till > > > Zeus wrote: > >> I just realize that, in my /etc/usb there are no device files? >> How that can't be? >> >> I have a scanner, it's a non Sane scanner, the usb-view can detected >> the scanner. I attach the information about my scanner. >> >> using Mandrake 9.0 >> >> >> ------------------------------------------------------------------------ >> >> T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 >> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 >> D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 >> P: Vendor=0000 ProdID=0000 Rev= 0.00 >> S: Product=USB UHCI Root Hub >> S: SerialNumber=d000 >> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA >> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub >> E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms >> T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 >> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 >> P: Vendor=06dc ProdID=0014 Rev= 1.00 >> S: Manufacturer=F.I.T. >> S: Product=USB Scanner >> S: SerialNumber=RTS8801C2-006 >> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA >> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none) >> E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms >> E: Ad=02(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms >> E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=250ms >> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 >> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 >> D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 >> P: Vendor=0000 ProdID=0000 Rev= 0.00 >> S: Product=USB UHCI Root Hub >> S: SerialNumber=d400 >> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA >> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub >> E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
i have Edit /etc/modules.conf adding the line options scanner vendor=0x06dc product=0x0014 And than do rmmod scanner but error displayed: rmmod: module scanner is not loaded what should i do? Information about my scanner. It's Prolink Scanner Winscan Pro 2448U www.fida.com I allready contact Prolink, and asking is there any chances their scanner will works on Linux. They said, the will be considering about it. Iam not a programer, than i cannot do anything more than just wait for someone make the driver :). -- zeus;] ================================================================ http://zeus.coolfreepage.com ||personal web page http://www.bajingloncat.com ||Bajing Loncat Studio http://www.bajingloncat.com/forum ||Bajing Loncat Forum ================================================================
