Hello, I have lately been using kernel 2.5.x on my computer. Because of several reasons I like that better. But, I cannot seem to get the scanner to work. It works fine with 2.4.x. It's a Epson Perfection 1260, and I have tried both the Epson Kowa backend and the plustek backend (which both works fine in 2.4.x). When using SANE_DEBUG_EPSON=255 I get that it can't open the device. But when loading the scanner module, it seems to find my scanner. And, as I said, the exact same setup works with 2.4.x, and my usb-printer works with 2.5.x. So my question is, are there any known issues with scanning with 2.5.x kernels?
Best regards, Stian Jordet [epson] sane_init, >usb /dev/usb/scanner0< [epson] attach(usb /dev/usb/scanner0) [epson] SANE Epson Backend v1.4.0ek - 2002-7-22 [epson] attach(usb /dev/usb/scanner0) [epson] attach: opening usb /dev/usb/scanner0 [epson] sane_start: /dev/usb/scanner0 open (USB) failed: No such device [epson] sane_get_devices() [plustek] gray Gamma : 1.00 [plustek] --------------------- [plustek] drvopen() [plustek] usbDev_open(/dev/usb/scanner0,) [plustek] open failed: -1 [plustek] sane_get_devices (0xbfffe868, 0) [plustek] sane_exit >From my dmesg: drivers/usb/image/scanner.c: USB scanner device (0x04b8/0x011d) now attached to scanner1
