Hi, please respond to the list, not to me. Maybe other people have more ideas about your problem.
On Sat, Apr 05, 2003 at 01:58:48PM +0000, José López Ruiz wrote: > >>init_module: No such device. > >> > Hint: insmod errors can be caused by incorrect module parameters, > including invalid IO or IRQ parameters. > insmod /lib/modules/2.4.14/kernel/drivers/scsi/g_NCR5380.o failed. > insmod g_NCR5380 failed. > > >Well, I don't have clairvoyance :-) What are the error messages on the > >command line and in /var/log/syslog? Looks like wrong parameters. All my cards worked with the default settings but some people reported that they had to change i/o settings. Maybe a different card uses the same i/o range? > With other I/O not works. The same error. Card defective or not plugged in correctly? Try a different ISA slot. > Apr 5 13:35:23 anastasia kernel: SCSI subsystem driver Revision: 1.00 > Apr 5 13:35:23 anastasia kernel: scsi0 : SCSI host adapter emulation for IDE > ATAPI devices > Apr 5 13:35:23 anastasia kernel: Vendor: RICOH Model: CD-R/RW MP7083A > Rev: 1.10 > Apr 5 13:35:23 anastasia kernel: Type: CD-ROM > ANSI SCSI revision: 02 > Apr 5 13:35:23 anastasia kernel: Attached scsi CD-ROM sr0 at scsi0, channel > 0, id 0, lun 0 > Apr 5 13:35:23 anastasia kernel: sr0: scsi3-mmc drive: 32x/32x writer cd/rw > xa/form2 cdda tray > Apr 5 13:35:23 anastasia kernel: Uniform CD-ROM driver Revision: 3.12 I'm not sure if this is a problem here but there were reports about the SCSI emultation for CDROMS making trouble with detection of real SCSI devices. I would be surprised if it stops the detection of SCSI controllers but you'd better try without idescsi. > Apr 5 13:56:08 anastasia pppd[374]: sent [PAP AuthReq id=0x1 > user="******" password=<hidden>] Thanks for your user id :-) Be carefull with sending complete logs to other people without checking what you send. The opassword was hidden in this case but that may be different with other logs. Bye, Henning
