Hello, Henning:
I have tried and get the correctly Mustek2400usb parameters. Now I can
scan Gray and Color Image . But When I scanner 300dpi or more . When
Scanning , sometime read data will stop, but motor is not stop. An other is
when I set bytes per line of scanner image is larger than 8000, scanner
will move motor to start area of scan, and not scan. I want to know what's
the matter of that.
Thanks a lot!!
There is Model of Mustek 2400usb , AFE is same value as I get in Win32
Driver.
static GT68xx_Model
mustek_2400usb_command_mode={
"mustek-2400usb", /* name
*/
"Mustek", /* vendor
*/
"Mustek 2400USB", /* model
*/
"P9fw.usb", /* firmware file name
*/
&mustek_gt6801_command_set, /* Model info */
1200, /* optical_xdpi
*/
1200, /* optical_ydpi
*/
1200, /* base_xdpi 600
*/
1200, /* base_ydpi
*/
1200, /* ydpi_force_line_mode
*/
SANE_TRUE, /* use base_ydpi for all
resolution */
{600,300,150,100,75,500}, /* xdpi_value
*/
{1200,600,300,100,50}, /* ydpi_value
*/
{8,0}, /* bpp_gray_values
*/
{8,0}, /* bpp_color_values
*/
SANE_FIX(7.0), /* start of scan area in mm
*/
SANE_FIX(12.0), /* start of scan area in mm
*/
SANE_FIX(224.0), /* width of scan area in
mm 220 */
SANE_FIX(300), /* high of scan area in mm
*/
SANE_FIX(0.0), /* start of white strip in mm
*/
SANE_FIX(7.0), /* start of black mark in mm
*/
SANE_FIX(0.0), /* start of scan area in TA mode
in mm */
SANE_FIX(0.0), /* start of scan area in TA mode
in mm */
SANE_FIX(100.0), /* width of scan area in
TA mode in mm */
SANE_FIX(100.0), /* high of scan area in TA
mode in mm */
SANE_FIX(0.0), /* start of white strip in TA mode
in mm */
24, /* ld_shift_r
*/
12, /* ld_shift_g
*/
0, /* ld_shift_b
*/
0, /* ld_shift_double
*/
LampOrder_RGB, /* color_order
*/
{0x12,0x06,0x0e,0x03,0x18+1,0x20+5}, /* AFE param 0x13
0x04 0x16 0x06 0x0f
0x02*/
{0x157,0x157,0x157}, /* exposure
time */
SANE_TRUE /* GT6801
chip */
};
_________________________________________________________________
Ãâ·ÑÏÂÔØ MSN Explorer: http://explorer.msn.com/lccn
