On Mon, 2004-01-05 at 22:15, Ben Prescott wrote: > I'm having problems getting this working. > > I've searched the archive and there's nothing in there apart from the > announcement when the teco3 backend was released.
see the teco mailinglist at yahoo, also mail archive is present. http://groups.yahoo.com/group/teco-sane-devel/ teco3 homepage http://www.zago.net/sane/#teco > > I'm guessing the key lines in the debug are as follows: > > [teco3] device is "Aashima " "IMAGERY 9600SP " "1.07" "TECO VM6552" > [teco3] teco_identify_scanner: exit, device not supported > [teco3] ERROR: attach_scanner: scanner-identification failed > To get this scanner working you have to patch the following files teco3.conf with the name of the scanner: scsi "Aashima" "IMAGERY 9600SP" teco3.h change TECO_VM3552 to TECO_VM3552, TECO_VM6552 teco3.c for a start add something like: { 6, "TECO VM6552", TECO_VM6552, "Aashima", IMAGERY 9600SP", (.. .. ..), values for your resolution ...., .... your max x and y resolution } There should more be changed to get the scanner working, but this should be a start (maybe scsi traces are needed to get a correct working scanner) some example on http://gkall.hobby.nl/notes1.html Frank Zago (teco3 maintaniner) should be able to tell more about the changes which are needed to get this scanner working. -- ---------- m.vr.gr. Gerard Klaver
