Hi people! I don't get to do my HP3200c runs. I'm running Debian (unstable) and I'm = using libsane 1.0.12-7. My dll.conf is:
# /etc/sane.d/dll.conf - Configuration file for the SANE dynamic = backend loader # # See the end of this file for information on some specific backends. # enable the next line if you want to allow access through the network: #net #abaton #agfafocus #apple #avision #artec #artec_eplus48u #as6e #bh #canon #canon630u #canon_pp #coolscan #coolscan2 #dc25 #dc210 #dc240 #dmc #epson #fujitsu #gphoto2 #gt68xx hp hpsj5s hp5400 #ibm #leo #ma1509 #matsushita #microtek #microtek2 #mustek mustek_pp #mustek_usb #nec #pie #plustek #pnm #qcam #ricoh #s9036 #sceptre #sharp #sm3600 #snapscan #sp15c #st400 #tamarack #teco1 #teco2 #teco3 #test #umax umax_pp #umax1220u #v4l # The following backends are not part of the SANE distribution # but are provided by the libsane-extras Debian package #hp4200 #niash # The HP OfficeJet backend is not part of the SANE distribution # but is provided by the hpoj Debian package #hpoj My umax_pp.conf is: # For documentation see sane-umax_pp(5) # GLOBAL # # size (in bytes) of scan buffer (default: 2 megabyte) option buffer 2097152 # DEVICES # # specify the port your scanner is connected to. Possible are 0x378 = (lp0) # 0x278 (lp2) and 0x3c8 (lp1) # # on linux systems, you may provide the device name of the ppdev = character # device : /dev/parport0, /dev/parport1, ...... # # on *BSD, you may provide the device name of the ppi device: /dev/ppi0, # /dev/ppi1, ... # default is ppdev since major use of the backend is for linux port /dev/parport0 #port /dev/lp0 # the following options are local to this scanner # brightness for red channel, if not given, will be automatically = computed # must be between 0 and 15 #option red-brightness 8 # brightness for green channel, if not given, will be automatically = computed # must be between 0 and 15 #option green-brightness 4 # brightness for blue channel, if not given, will be automatically = computed # must be between 0 and 15 #option blue-brightness 8 # contrast for red channel, if not given, will default to 0 # must be between 0 and 15 #option red-contrast 2 # contrast for green channel, if not given, will default to 0 # must be between 0 and 15 #option green-contrast 1 # contrast for blue channel, if not given, will default to 0 # must be between 0 and 15 #option red-contrast 2 # contrast for green channel, if not given, will default to 0 # must be between 0 and 15 #option green-contrast 1 # contrast for blue channel, if not given, will default to 0 # must be between 0 and 15 #option blue-contrast 1 # # # model number # # valid values are 610, 1220, 1600 and 2000 # # by default, no model, we rely on autodetection # in case you have black or 'inverted' scans, # you may prevent detection by providing the # model number #option astra 1220 Parallel port is configured as EPP: # quiteinsane No device were found [umax_pp_low] Found 0xFF expected 0x00 (umax_pp_low.c:5002) [umax_pp_low] Unexpected value for for register 0x0D, expected 0x00 or = 0x40, got 0x18 ! (umax_pp_low.c:5073) [umax_pp_low] SlowNibbleRegisterRead: found 0x20 expected 0x0 = (umax_pp_low.c:5084) [umax_pp_low] SlowNibbleRegisterRead: found 0xC expected 0x4 = (umax_pp_low.c:5135) [umax_pp_low] Loop 4, char 481 EPPReadBuffer failed! = (umax_pp_low.c:5224) .....another try: # quiteinsane No device were found [umax_pp_low] Found 0x11 expected 0x00 (umax_pp_low.c:5002) [umax_pp_low] Unexpected value for for register 0x0D, expected 0x00 or = 0x40, got 0x18 ! (umax_pp_low.c:5073) [umax_pp_low] SlowNibbleRegisterRead: found 0x20 expected 0x0 = (umax_pp_low.c:5084) [umax_pp_low] SlowNibbleRegisterRead: found 0xC expected 0x4 = (umax_pp_low.c:5135) [umax_pp_low] RegisterRead, found 0xFF expected 0x1F = (umax_pp_low.c:5203) # dmesg | grep parport parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] lp0: using parport0 (polling). Any sugestions? Regards, Carlos Menezes
