On Sun, 2003-12-14 at 15:11, [email protected] wrote: > Just got my Epson Perfection 2400 scanner. Attached it to my RH9 box. > Installed the latest sane-backends tarball. > > Here is what I see: > > sane-find-scanner > > does find the scanner > > But scanimage -L doesnt find it. > > cat /proc/bus/usb/devices does show my scanner. > > lsmod also shows the scanner module loaded. Just to be sure I did a > rmmod scanner > modprobe scanner vendor=0x.. product=0x... > > No problem here. > > I uncommented the > usb /dev/usb/scanner0 > line in /etc/sane.d/epson.conf > > /etc/sane.d/dll.conf does have the epson line uncommented > > If I do a scanimage -d epson:/dev/usb/scanner0 it says 'Cannot open device'. > > Still no luck. What am I missing? Perfection 2400 does seem to be supported > by the sane-epson backend. > > Help? > > Thanks check man sane-usb
check permission of /dev/usb/scanner0 try using module libusb instead of scanner -- ---------- m.vr.gr. Gerard Klaver
