------=_20031222083820_21324 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit
Jochen and Henning, appologies if you have already seen this email but I've been having troubles with my mail so decided to re-post. I've been through several tests now and here are the results: 1) scanimage -L - works fine 2) scanimage -T - works fine 3) scanimage > /dev/null - starts fine then hangs 4) scanimage -T - works fine subsequent to a hang (I kill the process to get out of it). 5) saned -d128 and scanimage -d net:localhost:mustek_pp:Mustek-1200CP - starts fine but then hangs (see attached). 6) scanimage -T - works fine subsequent to the previous hang (simply need to CTRL-C out of the above). Can anyone advise what I should try next? > Hi, > > does this also happen when you scan from command line, i.e. using > scanimage? > > regards > -- jochen ------=_20031222083820_21324 Content-Type: text/plain; name="jim.txt" Content-Disposition: attachment; filename="jim.txt" [saned] main: starting debug mode (level 128) [saned] main: trying to get port for service `sane' (getaddrinfo) [saned] main: "sane" service unknown on your host; you should add [saned] main: sane 6566/tcp saned # SANE network scanner daemon [saned] main: to your /etc/services file (or equivalent). Proceeding anyway. [saned] main: [0] socket () using IPv6 [saned] main: [0] setsockopt () [saned] main: [0] bind () to port 6566 [saned] main: [0] listen () [saned] main: [1] socket () using IPv4 [saned] main: [1] setsockopt () [saned] main: [1] bind () to port 6566 [saned] main: [1] bind failed: Address already in use [saned] main: waiting for control connection [saned] saned (AF-indep+IPv6) from sane-backends 1.0.13 ready [saned] check_host: access by remote host: ::1 [saned] check_host: remote host is IN6_LOOPBACK: access granted [saned] init: access granted [saned] init: access granted to root@::1 [saned] process_request: waiting for request [saned] process_request: got request 2 [saned] process_request: access to resource `mustek_pp' granted [sanei_debug] Setting debug level of mustek_pp to 2. [saned] process_request: waiting for request [saned] process_request: got request 4 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 7 [saned] start_scan: using port 2115 for data [saned] process_request: waiting for data connection [saned] process_request: access to data port from ::1 [saned] do_scan: start [saned] do_scan: processing RPC request on fd 4 [saned] process_request: waiting for request [saned] process_request: got request 6 [mustek_pp] sane_get_parameters: can't set parameters while scanning [saned] do_scan: trying to read 8188 bytes from scanner [saned] do_scan: read 4096 bytes from scanner [saned] do_scan: trying to write 4100 bytes to client [saned] do_scan: wrote 4100 bytes to client [saned] do_scan: trying to read 4088 bytes from scanner [saned] do_scan: read 4088 bytes from scanner [saned] do_scan: trying to write 4092 bytes to client [saned] do_scan: wrote 4092 bytes to client [saned] do_scan: trying to read 8188 bytes from scanner ....SNIP..... [saned] do_scan: trying to write 3040 bytes to client [saned] do_scan: wrote 3040 bytes to client [saned] do_scan: trying to read 8188 bytes from scanner [saned] do_scan: read 1060 bytes from scanner [saned] do_scan: trying to write 1064 bytes to client [saned] do_scan: wrote 1064 bytes to client [saned] do_scan: trying to read 7124 bytes from scanner [saned] do_scan: read 4096 bytes from scanner [saned] do_scan: trying to write 4100 bytes to client [saned] do_scan: wrote 4100 bytes to client [saned] do_scan: trying to read 3024 bytes from scanner [saned] do_scan: read 3024 bytes from scanner [saned] do_scan: trying to write 3028 bytes to client [saned] do_scan: wrote 3028 bytes to client [saned] do_scan: trying to read 8188 bytes from scanner [saned] do_scan: read 1072 bytes from scanner [saned] do_scan: trying to write 1076 bytes to client [saned] do_scan: wrote 1076 bytes to client [saned] do_scan: trying to read 7112 bytes from scanner [saned] do_scan: read 4096 bytes from scanner [saned] do_scan: trying to write 4100 bytes to client [saned] do_scan: wrote 4100 bytes to client [saned] do_scan: trying to read 3012 bytes from scanner [saned] do_scan: read 3012 bytes from scanner [saned] do_scan: trying to write 3016 bytes to client [saned] do_scan: wrote 3016 bytes to client [saned] do_scan: trying to read 8188 bytes from scanner [saned] do_scan: read 686 bytes from scanner [saned] do_scan: trying to write 690 bytes to client [saned] do_scan: wrote 690 bytes to client [saned] do_scan: trying to read 7498 bytes from scanner [saned] do_scan: read 0 bytes from scanner [saned] do_scan: status = `End of file reached' [saned] do_scan: statuscode `End of file reached' was added to buffer [saned] do_scan: select_fd was closed --> EOF [saned] do_scan: trying to write 9 bytes to client [saned] do_scan: wrote 9 bytes to client [saned] do_scan: done, status=End of file reached [saned] process_request: waiting for request [saned] process_request: got request 8 [saned] process_request: waiting for request [saned] process_request: got request 3 ------=_20031222083820_21324--
