Hi, On Wed, Dec 24, 2003 at 02:52:10PM +0100, avv. Giovanni Rocchi wrote: > after posted here my problem this morning I set SANE_DEBUG_SANEI_USB to > 255. > > Running scanimage -L I have this:
[works only with debugging enabled] That's the known problem with libusb (or the MacOS X USB system?). > >PB17:/usr/local/bin grocchi$ ./scanimage > ~grocchi/test.pnm [...] > >[sanei_debug] Setting debug level of fujitsu to 0. Can you enable debugging for fujitsu also? It's easier to understand if the fujitsu messages are also enabled. > >[sanei_usb] sanei_usb_read_bulk: trying to read 13 bytes > >usb_bulk_read: ep addr = 0x81 > >Converting ep address to pipeRef. > >ep_to_pipeRef: Pipe 1: DIR: 1 number: 1 > >ep_to_pipeRef: pipeRef for ep address 0x81 found: 0x01 > >usb_bulk_read: endpoint=0x81 size=13 timeout=30.000000sec > >[sanei_usb] 0000: 53 00 00 00 00 00 00 00 00 00 00 00 00 > >S............... > >[sanei_usb] sanei_usb_read_bulk: wanted 13 bytes, got 13 bytes > >[sanei_usb] sanei_usb_write_bulk: trying to write 31 bytes > >[sanei_usb] 0000: 43 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > >C............... > >[sanei_usb] 0010: 00 00 00 28 00 00 00 00 00 00 77 04 00 00 00 > >...(......w..... > >Converting ep address to pipeRef. > >ep_to_pipeRef: an error occurred getting pipe information on pipe 1 > >ep_to_pipeRef: No connection to IOService This seems to be the first error. My guess is: the fujitsu backend uses fork () and this doesn't work correctly on MacOS X. So if you want support for your scanner, the fujitsu backend must be converted to use the sanei_thread API instead of fork(). Have a look at the archive of sane-devel for a discussion about the fork problems. Bye, Henning
