On Sun, 28 Dec 2003, David Sumbler wrote: > On Sun, 28 Dec 2003, Henning Meier-Geinitz wrote: > > > On Sat, Dec 27, 2003 at 09:43:02PM +0000, David Sumbler wrote: > > > I run RedHat 8.0, with an HP PSC-2210 USB printer/scanner/copier. > > > > [...] > > > > > But I cannot get sane to work (although it used to). I have now tried > > > removing and re-installing sane (1.0.8), but 'scanimage --list > > > devices' just gives "No scanners were identified." etc. > > > > 1.0.8 is quite old, 1.0.13 is current. Anyway, that scanner is not > > supported by the SANE distribution but by the external hpoj backend so > > it's the version of that backend that matters. > > I installed the latest (hpoj 0.91) yesterday. > > > > I modified /etc/xinetd.conf and /etc/services as suggested in 'man > > > saned', and I tried changing both the user and group in > > > /etc/xinetd.conf to 'root' as well. > > > > You need saned only if you want to scan over the network or if you > > have a parallel port scanner that needs root priviledges otherwise. > > The PSC-2210 is USB only. My network consists (at the moment) only of > my PC and a router, so scanning over the network is not currently > relevant. > > However, I think that possibly some of the cups printing problems that > I was getting until a day or two ago were to do with some confusion > between 127.0.0.1 and 192.168.0.10 (which is the PC's IP address on > the LAN) - maybe something odd going on there. > > > "scanimage -L" as root should work even in the case of wrong > > permissions. > > No, this doesn't work. > > > Does sane-find-scanner find the scanner? > > No > > > Is "hpoj" mentioned in dll.conf? > > This is /etc/sane.d/dll.conf, right? > Yes - I have the line "hpoj" at the end of the file. > > Thanks for your help.
I have still had no success with this. Do you have any further suggestions? Incidentally, the PSC-2210 works fine (including scanning) under Windows ME, so it does not seem to be a cable or scanner fault. David --
