HW = Dell Dimension 2400 Using FreeBSD 5.2.1, Libieee1284 0.2.8 (compiled from source)
I've tried no port, ppi0, lpt0, 0x378, etc. Taken the printer off the chain, etc. tried force-nibble. nada - no click no beep no lamp, nada output from boot in messages: ep 7 08:44:10 thurston kernel: ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0 Sep 7 08:44:10 thurston kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/ NIBBLE) in COMPATIBLE mode Sep 7 08:44:10 thurston kernel: ppc0: FIFO with 16/16/8 bytes threshold Sep 7 08:44:10 thurston kernel: ppbus0: <Parallel port bus> on ppc0 Sep 7 08:44:10 thurston kernel: lpt0: <Printer> on ppbus0 Sep 7 08:44:10 thurston kernel: lpt0: Interrupt-driven port Sep 7 08:44:10 thurston kernel: ppi0: <Parallel I/O> on ppbus0 output of scan image: [canon_pp] detect_mode: Opening port 0x378 [canon_pp] detect_mode: Claiming port. [canon_pp] detect_mode: Port supports ECP-S. [canon_pp] detect_mode: Using ECP-S Mode [canon_pp] sane_init: >> initialise [canon_pp] Scanner not ready (0xf). Attempting to reset... [canon_pp] Timeout: Reset 2 response 1 (0x07 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 2 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 2 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 2 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 2 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Reply 2 (0x0c in 0x1f) - Status = 0x0f [canon_pp] initialise: could not wake scanner [canon_pp] sane_init: << 1 initialise [canon_pp] sane_init: Couldn't contact scanner on port 0x378. Probably no scanner there?
