Sorry for the mis-send. Again, if this is not the correct forumn I apologize. Anyway, I successfully installed the sane and libieee1284 packages from the packman web site. This is my current state now. It's found by sane-find-scanner, but not by scanimage -L
sane-find-scanner # No SCSI scanners found. If you expected something different, make sure that # you have loaded a SCSI driver for your SCSI adapter. found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x0205 [HP ScanJet 3300C]) at libusb:001:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). Any assistance is greatly appreciated. Regards, Brad --- On Fri 05/28, Brad McNeely < [email protected] > wrote: From: Brad McNeely [mailto: [email protected]] To: [email protected] Date: Fri, 28 May 2004 11:32:51 -0400 (EDT) Subject: Re: [sane-devel] Using sane on Suse 9.1 <br>OK, I installed the libieee1284 and sane packages. But now this is happening, is this the right forum?<br><br>sane-find-scanner<br><br><br><br> # No SCSI scanners found. If you expected something different, make sure that<br><br> # you have loaded a SCSI driver for your SCSI adapter.<br><br><br><br>found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x0205 [HP ScanJet 3300C]) at libusb:001:002<br><br> # Your USB scanner was (probably) detected. It may or may not be supported by<br><br> # SANE. Try scanimage -L and read the backend's manpage.<br><br><br><br> # Not checking for parallel port scanners.<br><br><br><br> # Most Scanners connected to the parallel port or other proprietary ports<br><br> # can't be detected by this program.<br><br><br><br> # You may want to run this program as root to find all devices. Once you<br><br> # found the scanner devices, be sure to adjust access permissions as<br><br> # necessary.<br><br>bmcneely@linux:~> rpm -qa | grep -i libusb<br><br>libusb-0.1.8-31<br><br><br><br><br><br><br><br><br><br><br><br> --- On Fri 05/28, Michael Herder < [email protected] > wrote:<br><br>From: Michael Herder [mailto: [email protected]]<br><br>To: [email protected]<br><br>Date: Fri, 28 May 2004 16:07:09 +0200<br><br>Subject: Re: [sane-devel] Using sane on Suse 9.1<br><br><br><br>Brad McNeely, Friday 28 May 2004 15:27:<br>> When I upgraded from SuSE 8.2 to SuSE 9.1 I lost the ability to use my HP<br>> scanjet 3300C scanner. It was recommended that I use<br>> sane-backends-1.0.14.tar.gz. I successfully downloaded the file and did<br>> these steps as per the README:<br><br>See <br>http://packman.links2linux.de/?action=211<br>They have 1.0.14 for SuSE 9.1 (RPM)...<br><br>bb<br>Michael<br><br>-- <br>sane-devel mailing list: [email protected]<br>http://lists.alioth.debian.org/mailman/listinfo/sane-devel<br>Unsubscribe: Send mail with subject "unsubscribe your_password"<br> to [email protected]<br><br><br>_______________________________________________<br>Join Excite! - http://www.excite.com<br>The most personalized portal on the Web!<br><br>-- <br>sane-devel mailing list: [email protected]<br>http://lists.alioth.debian.org/mailman/listinfo/sane-devel<br>Unsubscribe: Send mail with subject "unsubscribe your_password"<br> to [email protected]<br> _______________________________________________ Join Excite! - http://www.excite.com The most personalized portal on the Web!
