Hello I'm running a RHEL 3 clone (tao-linux). I've upgraded my sane-backends to 1.0.14, frontends to 1.0.12 and xsane to .91. I'm using plustek_pp in direct mode (with libieee1284). I can't seem to get any further along getting the scanner working. I've set the debug to max, but I don't know what it is doing. In both cases "xsane -d plustek_pp:/dev/parport0" and "scanimage -d plustek_pp:/dev/parport0" go through and seem to detect the scanner and stop at the CCD type I've included the debug log. What can I do?
When it gets to the last line below, it just sits there, with xsane, I don't get any more dialog boxes, CPU usages is about 90% for that one program regardless of whether it is scanimage or xsane. DEBUGLOG= [sanei_debug] Setting debug level of plustek_pp to 255. [plustek_pp] PlustekPP backend V0.01-8, part of sane-backends 1.0.14 [plustek_pp] ># Plustek-PP SANE Backend configuration file< [plustek_pp] ># For use with Plustek parallel-port scanners< [plustek_pp] >#< [plustek_pp] >< [plustek_pp] >#< [plustek_pp] ># user either [direct] or [kernel] to access the scanner< [plustek_pp] ># when using [kernel], device specifies the device-node, which is created< [plustek_pp] ># by the kernel-module loader (applies only to Linux)< [plustek_pp] ># when using [direct], device is used to set the parallel-port base address< [plustek_pp] ># or a device-name suitable for libieee1284, i.e. parport0< [plustek_pp] >#< [plustek_pp] >#[direct]< [plustek_pp] >#device 0x378< [plustek_pp] >#device /dev/parport0< [plustek_pp] >#< [plustek_pp] ># leave the default values as specified in /etc/modules.conf< [plustek_pp] >#< [plustek_pp] >#option warmup 15< [plustek_pp] >#option lOffOnEnd 1< [plustek_pp] >#option lampOff 120< [plustek_pp] ># model override switch, mostly for cosmetic changes, if the autodetection< [plustek_pp] ># does not work or could not work correctly< [plustek_pp] >#option mov 7< [plustek_pp] >< [plustek_pp] >#< [plustek_pp] ># example for accessing the scanner via libieee1284< [plustek_pp] >#< [plustek_pp] >[direct]< [plustek_pp] >device parport0< [plustek_pp] Decoding device name >parport0< [plustek_pp] >option warmup 15< [plustek_pp] Decoding option >warmup< [plustek_pp] >option lOffOnEnd 1< [plustek_pp] Decoding option >lOffOnEnd< [plustek_pp] >option lampOff 120< [plustek_pp] Decoding option >lampOff< [plustek_pp] >< [plustek_pp] >#< [plustek_pp] ># example for accessing the scanner via the kernel module< [plustek_pp] >#< [plustek_pp] >#[kernel]< [plustek_pp] >#device /dev/pt_drv< [plustek_pp] >#< [plustek_pp] >#option warmup -1< [plustek_pp] >#option lOffOnEnd -1< [plustek_pp] >#option lampOff -1< [plustek_pp] attach (parport0, 0xbfffb140, (nil)) [plustek_pp] Device configuration: [plustek_pp] device name : >parport0< [plustek_pp] direct I/O : yes [plustek_pp] warmup : 15s [plustek_pp] lampOff : 120 [plustek_pp] lampOffOnEnd : yes [plustek_pp] model override: 0 [plustek_pp] --------------------- [plustek_pp] drvopen() [plustek_pp] ptdrvInit(0) [plustek_pp] Init settings done [plustek_pp] ScanData = 0x08054638 [plustek_pp] Assigning port handle 0 [plustek_pp] ptdrvOpen(port=0x0) [plustek_pp] Try to claim the parport [plustek_pp] Setting SPP-mode [plustek_pp] Setting PS/2-mode [plustek_pp] Setting EPP-mode [plustek_pp] We're using libIEEE1284 I/O [plustek_pp] Starting Scanner-Autodetection [plustek_pp] ************ DETECTP48xx ************ [plustek_pp] ModelSet4800() [plustek_pp] modelInitPageSettings() [plustek_pp] A4 set [plustek_pp] ModelSet4800() done. [plustek_pp] P48xxInitAsic() [plustek_pp] DacInitialize() [plustek_pp] ImageInitialize() [plustek_pp] IOFuncInitialize() [plustek_pp] IOInitialize() [plustek_pp] * using readfunction >fnEPPRead< [plustek_pp] MotorInitialize() [plustek_pp] ResetPort() [plustek_pp] Test 0x55 [plustek_pp] Test 0xAA [plustek_pp] Compare data=0x7f and status=0xf, port=0x0 [plustek_pp] p48xxReadWriteTest() [plustek_pp] Found a 96001 ASIC at Reg 0x13 [plustek_pp] ModelSet4800() [plustek_pp] modelInitPageSettings() [plustek_pp] A4 set [plustek_pp] ModelSet4800() done. [plustek_pp] Moving 32 bytes to scanner, IODELAY = 0... [plustek_pp] ... done. [plustek_pp] p48xxCheck4800Memory() [plustek_pp] Moving 1280 bytes to scanner, IODELAY = 0... [plustek_pp] ... done. [plustek_pp] Putting Scanner (ASIC 96001/3) into Idle-Mode [plustek_pp] detectScannerConnection() returns 0. [plustek_pp] p48xxSetupScannerVariables() [plustek_pp] No ASIC 97003 found. [plustek_pp] Status-Register = 0x8F [plustek_pp] Scanner has Full/Half Stepping drive [plustek_pp] CCD is SONY Type _________________________________________________________________ MSN Premium helps eliminate e-mail viruses. Get 2 months FREE* http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=http://hotmail.com/enca&HL=Market_MSNIS_Taglines
