Hello, I'm having problems using my 9630P scanner on RH9.
Firstly, I've got the scanner connected to the PC with a parallel cable. I then downloaded sane-backends-1.0.14 and sane-frontends-1.0.12 and did ./configure, make and make install on both. No problems so far. My /etc/ld.so.conf has an entry /usr/local/lib/ and I did /sbin/ldconfig My /usr/local/etc/sane.d/ has an entry plustek_pp In /proc/sys/dev/parport/parport0/ if I do "cat modes", I get PCSPP,TRISTATE,EPP My /usr/local/etc/sane.d/plustek_pp.conf has entries: [direct] device 0x378 option warmup -1 option lOffOnEnd -1 option lampOff -1 [direct] device parport0 When I do "scanimage -L", I get "No scanners were identified..." If I set export SANE_DEBUG_DLL=255 and export SANE_DEBUG_BACKENDNAME=255, I get output including: [dll] add_backend: adding backend `plustek_pp' [dll] init: backend `plustek_pp' is version 1.0.0 [dll] load: searching backend `plustek' in `/usr/local/lib/sane' [dll] load: trying to load `/usr/local/lib/sane/libsane-plustek.so.1' [dll] load: dlopen()ing `/usr/local/lib/sane/libsane-plustek.so.1' [dll] sane_get_devices: found 0 devices Also, there's a printer installed on lp0 (daisy changed after the scanner). Why can't I find the scanner? Best regards, Stephen.
