Currently I have the ADF physical mounted on the scanner, and I wished to get this to work first on Linux, before I replace the ADF with the TPU. That is, I havent't tried the TPU on Linux yet.
I have attached two files on the same PC using different Linux distros (multiboot): 1) scan.log_sjds is created on Sun Java Desktop System R2 (Suse 8.1 based) using compiled Sane 1.0.14 and Xsane 0.95. (At installation time, I increased the access modus of /dev/sg0 from 600 to 777, before the scanner was detected by the software). 2) scan.log_suse is created on SuSE9.1 Pro using Sane 1.013 and Xsane 0.92 from the SuSE media. Terje J. Hanssen Karl Heinz Kremer wrote: > Does scanning with the TPU work? > > Can you please capture a debug log. Run the following commands in a > terminal window: > > export SANE_DEBUG_EPSON=128 > xsane > /tmp/scan.log 2>&1 > > Then select the ADF and try to scan. THis will capture all communication > between the backend and the scanner in the file /tmp/scan.log. Please > attach this to an email and send it to me. > > Thanks, > > Karl Heinz > > > Terje J. Hanssen said: > >> I have an SCSI Epson Perfection 1640SU OFFICE scanner, which includes an >> ADF and optional a Filmadapter (included in the PHOTO model). The >> included software for Windows, Epson Smartpanel for scanners and Epson >> Twain5, support both the ADF and the Filmadapter. >> >> Now I try to get this scanner to work with Linux (SJDS and Suse9.1) >> using Sane 1.0.14 and Xsane 0.95. Flatbed scanning works OK in both >> cases. But when selecting scanner source Auto Doc Feeder in Xsane, the >> following error message occure: "Failed to start scanner: Error during >> device I/O", and no scanning starts. Neither Kooka works with the ADF in >> Suse9.1. >> >> According to >> http://www.sane-project.org/cgi-bin/driver.pl?manu=epson&model=perfection+1640+SU&bus=scsi >> it looks like the Sane support for Epson Perfection 1640SU should be >> complete, possibly also for the PHOTO model with the filmadapter? >> >> However, it looks like there maybe exist different versions of the Sane >> backends for this scanner, epson 0.2.42 and epkowa 1.5.2. I am not sure >> which version that is included in Sane 1.0.14. >> >> Can someone explain the differences for me and which version I possibly >> possibly should use and how? >> Can there be other reason that the ADF don't work? Maybe the ADF is not >> supported at all, or? >> I am also interested to hear if someone has got the Epson Perfection >> 1640SU ADF to work and possibly how they got it to work? >> >> Thanks, >> >> Terje J. Hanssen >> >> >> >> >> >> -- >> sane-devel mailing list: [email protected] >> http://lists.alioth.debian.org/mailman/listinfo/sane-devel >> Unsubscribe: Send mail with subject "unsubscribe your_password" >> to [email protected] >> > > >
