hi, i would like to get my agfa 1236s snapscan working. (it's supported http://www.sane-project.org/sane-mfgs.html#Z-AGFA). i tried to follow the instructions on sane-project.org but i can not even detect it. i powered down my computer, connected the scanner, powered on the scanner, powered on the computer. but still:
root@delirium src # sane-find-scanner # No SCSI scanners found. If you expected something different, make sure that # you have loaded a SCSI driver for your SCSI adapter. # No USB scanners found. If you expected something different, make sure that # you have loaded a driver for your USB host controller and have installed a # kernel scanner module. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. root@delirium src # and if i cat /proc/scsi/scsi i get root@delirium src # cat /proc/scsi/scsi Attached devices: root@delirium src # i have scsi generic support in my kernel, and other usb devices work fine in scsi-emulation. is there some more useful information i could post? i really don't know where to start from. btw i use gentoo and currently i have a 2.6.3 kernel. thanks for any help -- Dubitare Disobbedire Disertare ---- Renato Budinich [email protected]
